English
Language : 

IAM-92516 Datasheet, PDF (1/8 Pages) Agilent(Hewlett-Packard) – High Linearity GaAs FET Mixer
Agilent IAM-92516 High
Linearity GaAs FET Mixer
Data Sheet
Description
Agilent Technologies’s IAM-92516
is a high linearity GaAs FET Mixer
using 0.5 µm enhancement mode
pHEMT technology. This device
houses in Pb-free and Halogen free
16 pins LPCC 3x3[2] plastic
package. The IAM-92516 has built-
in LO buffer amplifier which
requires -3 dBm LO power to
deliver an input third order
intercept point of 27 dBm. LO port
is 50 ohm matched and can be
driven differential or single ended
while IF port is 200 ohm matched
and fully differential. RF port
requires external matching
network for optimum input return
loss and IIP3 performance.
RF and LO frequency range
coverage from 400 to 3500 MHz
and IF coverage is from DC to 300
MHz. This mixer consumes 26 mA
of current from a single 5V supply.
Conversion loss is typically 6 dB
and noise figure is typically 12.5
dB. Excellent output power at 1 dB
compression of 9 dBm. LO to IF,
LO to RF and RF to IF isolation are
greater than 30 dB.
The IAM-92516 is ideally suited for
frequency up/down conversion for
base station radio card receiver
and transmitter, microwave link
transceiver, MMDS, modulation
and demodulation for receiver and
transmitter and general purpose
resistive FET mixer, which require
high linearity. All devices are 100%
RF and DC tested.
Pin Connections and
Package Marking
Notes:
Package marking provides orientation and
identification
“M3” = Device Code
“X” = Month code indicates the month of
manufacture
Attention:
Observe precautions for
handling electrostatic
sensitive devices.
ESD Machine Model (Class A)
ESD Human Body Model (Class 1A)
Refer to Agilent Application Note A004R:
Electrostatic Discharge Damage and Control.
Features
DC = 5V @ 26 mA (Typ.)
RF = 1.91 GHz, PinRF = -10 dBm;
LO = 1.7 GHz, PinLO = -3 dBm;
IF = 210 MHz unlesss otherwise
specified
• Lead-free Option Available
• High Linearity: 27 dBm IIP3
• Conversion Loss: 6 dB typical
• Wide band operation: 400-3500
MHz RF & LO input DC – 300 MHz
IF output
• Fully differential or single ended
operation
• High P1dB: 9 dBm typical
• Low current consumption: 5V@
26 mA typical
• Excellent uniformity in product
specifications
• Small LPCC 3.0 x 3.0 x 0.75 mm
package
• MTTF > 300 years[1]
• MSL-1 and lead-free
• Tape-and-Reel packaging option
available
Applications
• Frequency up/down converter for
base station radio card, microwave
link transceiver, and MMDS
• Modulation and demodulation for
receiver and transmitter
• General purpose resistive FET
mixer for other high linearity
applications
Notes:
1. Refer to reliability datasheet for detailed
MTTF data.
2. Conform to JEDEC reference outline
MO229 for DRP-N