IAM-82028 Datasheet, PDF (1/4 Pages) Agilent(Hewlett-Packard) – Silicon Bipolar MMIC 5 GHz Active Double Balanced Mixer/ IF Amp

Silicon Bipolar MMIC 5 GHz
Active Double Balanced Mixer/
IF Amp
Technical Data
IAM-82028
Features
• 15 dB RF-IF Conversion
Gain from 0.05 - 5 GHz
• IF Output from DC to 2 GHz
• IF Output P_ldB up to
+12 dBm
• Single Polarity Bias Supply:
V_CC = 7 to 13 V
• Load-Insensitive
Performance
• Conversion Gain Flat Over
Temperature
• Low LO Power Requirements:
0 dBm Typical
• Low RF to IF Feedthrough,
Low LO Leakage
• Hermetic Ceramic Surface
Mount Package
Description
The IAM-82028 is a complete
moderate-power double-balanced
active mixer housed in a
miniature ceramic hermetic
surface mount package. It is
designed for narrow or wide
bandwidth commercial, industrial
and military applications having
RF inputs up to 5 GHz and IF
outputs from DC to 2 GHz.
Operation at RF and LO
frequencies less than 50 MHz can
be achieved using optional
external capacitors to ground.
The IAM-82028 is particularly well
suited for applications that
require load-insensitive
conversion gain and good
spurious signal suppression and
moderate dynamic range with
minimum LO power. Typical
applications include frequency
Typical Biasing Configuration and
Functional Block Diagram
28 Package
PIN 1
downconversion, modulation,
demodulation and phase
detection for fiber-optic, GPS
satellite navigation, mobile radio,
and communications receivers.
The IAM series of Gilbert
multiplier-based frequency
converters is fabricated using
HP’s 10 GHz f_T, 25 GHz f_MAX
ISOSAT^TM-I silicon bipolar process
which uses nitride self-alignment,
submicrometer lithography,
trench isolation, ion implantation,
gold metallization and polyimide
inter-metal dielectric and scratch
protection to achieve excellent
performance, uniformity and
reliability.
7-131
5965-9114E