IAM-82008 Datasheet, PDF (1/4 Pages) Agilent(Hewlett-Packard) – Silicon Bipolar MMIC 5 GHz Active Double Balanced Mixer/ IF Amp

Silicon Bipolar MMIC 5 GHz
Active Double Balanced Mixer/
IF Amp
Technical Data
IAM-82008
Features
• RF-IF Conversion Gain:
15 dB from 0.05-5 GHz
• IF Conversion Gain from DC
to 2 GHz
• IF Output P_1dB:
+8␣ dBm␣ Typical
• Single Polarity Bias Supply:
V_CC = 7 to 13 V
• Load Insensitive
Performance
• Conversion Gain Flat over
Temperature
Description
Hewlett-Packard's IAM-82008 is a
complete moderate-power double-
balanced active mixer housed in a
miniature low cost surface mount
package. It is designed for narrow
or wide bandwidth commercial
and industrial applications having
RF inputs up to 5 GHz. Operation
of RF and LO frequencies below
50 MHz can be achieved using
optional external capacitors to
ground. The IAM-82008 is
particularly well suited for
applications that require load-
insensitive conversion gain and
good spurious signal suppression
and moderate dynamic range with
low LO power. Typical
applications include frequency
down-conversion, up-conversion,
modulation, demodulation, and
phase detection. Markets include
fiber-optics, GPS satellite
navigation, mobile radio, and
communications transmitters and
receivers.
Plastic SO-8 Package
The IAM series of Gilbert
multiplier-based frequency
converters is fabricated using
Hewlett Packard's 10 GHz f_T 25
GHz f_MAX ISOSAT™-1 silicon
bipolar process. This process uses
nitride self-alignment, submicrom-
eter lithography, trench isolation,
ion implantation, gold
metallization, and polyimide inter-
metal dielectric and scratch
protection to achieve excellent
performance, uniformity and
reliability.
Functional Block Diagram
and Pin Configuration
1
8
2
7
3
6
4
5
Pin Description
1 IF Output
2 V_ee, AC Ground
3 V_ee, AC Ground Thermal Contact
4 RF Input
8 RF Ground (optional)
7 V_CC
6 LO Ground (optional)
5 LO Input
7-127
5965-9112E