|
HSDL-3210 Datasheet, PDF (1/20 Pages) Agilent(Hewlett-Packard) – IrDA Compliant Low Power 1.15 Mbit/s Infrared Transceiver | |||
|
Agilent HSDL-3210
IrDA® Compliant Low Power
1.15 Mbit/s Infrared
Transceiver
Data Sheet
Description
The HSDL-3210 is one of a new
generation of low-cost Infrared (IR)
transceiver modules from Agilent
Technologies. It features one of the
smallest footprint in the industry at
2.5 H x 8.0 W x 3.0 D mm.
Although the supply voltage can
range from 2.7 V to 3.6 V, the LED
is driven by an internal constant
current source of 60 mA at SIR data
rates and 150 mA at MIR data rates.
The HSDL-3210 incorporates the
capability for adjustable optical
power. The optical power can be
adjusted lower when the nominal
desired link distance is very short.
At 5 cm link distance, only 6% of
the full power is required.
The HSDL-3210 supports the
Serial Interface for Transceiver
Control Specification that
provides a common interface
between the transceiver and
controller. It is also designed to
interface to input/output logic
circuits as low as 1.5 V.
Features
⢠Fully Compliant to IrDA 1.4 low
power specification from 9.6 kbit/s
to 1.15 Mbit/s
⢠Ultra small surface mount
package
⢠Minimal height: 2.5 mm
⢠VCC from 2.7 to 3.6 volts
⢠Interface to 1.5 volts input/output
logic circuits
⢠Withstands 100 mVp-p power
supply ripple typically
⢠Adjustable optical power for link
distance from 5 to 20 cm
⢠Low shutdown current â 10 nA
typical
⢠Complete shutdown â TxD, RxD,
PIN diode
⢠Three optional external
components
⢠Temperature performance
guaranteed, -25°C to 85°C
⢠Integrated EMI shield
⢠IEC60825-1 class 1 eye safe
⢠Edge detection input â Prevents
the LED from long turn on time
Applications
⢠Mobile telecom
â Cellular phones
â Pagers
â Smart phones
⢠Data communication
â PDAs
â Portable printers
⢠Digital imaging
â Digital cameras
â Photo-imaging printers
|
▷ |