English
Language : 

HMMC-3024 Datasheet, PDF (1/9 Pages) Agilent(Hewlett-Packard) – DC-12 GHz High Efficiency GaAs HBT MMIC Divide-by-4 Prescaler
Agilent HMMC–3024
DC–12 GHz High Efficiency
GaAs HBT MMIC
Divide–by–4 Prescaler
1GC1-8007
Data Sheet
Features
• Wide Frequency Range:
0.2-12 GHz
• High Input Power Sensitivity:
On-chip pre- and post-amps
-25 to +10 dBm (1–8 GHz)
-15 to +18 dBm (8–10 GHz)
-10 to +2 dBm (10–12 GHz)
• Dual-mode Pout: (Chip Form)
0 dBm (0.5 Vp–p) @ 40 mA
-6.0 dBm (0.25 Vp–p) @ 30 mA
• Low Phase Noise:
-153 dBc/Hz @ 100 kHz Offset
• (+) or (-) Single Supply Bias
Operation
• Wide Bias Supply Range:
4.5 to 6.5 volt operating range
• Differential I/0 with on-chip
50 Ω matching
Description
The HMMC-3024 GaAs HBT MMIC
prescaler offers dc to 12 GHz fre-
quency translation for use in
communications and EW systems
incorporating high-frequency PLL
oscillator circuits and signal-path
down conversion applications.
The prescaler provides a large input
power sensitivity window and low
phase noise. In addition to the fea-
tures listed above the device offers
an input disable contact pad to elimi-
nate any self-oscillation condition.
Chip Size:
1330 x 440 µm (52.4 x 17.3 mils)
Chip Size Tolerance: ± 10 µm (± 0.4 mils)
Chip Thickness: 127 ± 15 µm (5.0 ± 0.6 mils)
Pad Dimensions: 70 x 70 µm (2.8 x 2.8 mils)
Absolute Maximum Ratings1
(@ TA = 25°C, unless otherwise indicated)
Symbol
Parameters/Conditions
Min.
Max.
Units
VCC
Bias supply voltage
+7
volts
VEE
Bias supply voltage
-7
volts
VCC - VEE
Bias supply delta
0
+7
volts
VDisable
Pre-amp disable voltage
VEE
VCC
volts
VLogic
Logic threshold voltage
VCC -1.5 VCC -1.2 volts
Pin(CW)
CW RF input power
+10
dBm
VRFin
TBS2
DC input voltage
(@ RFin or RFin ports)
Backside operating temperature -40
VCC ±0.5 volts
+85
°C
Tst
Storage temperature
-65
+165
°C
Tmax
Maximum assembly temperature
310
°C
Notes
(60 s max.)
1. Operation in excess of any parameter limit (except TBS) may cause permanent damage to the device.
2. MTTF > 1 x 106 hours @ TBS ≤ 85°C. Operation in excess of maximum operating temperature (TBS) will degrade MTTF.