HMMC-3022 Datasheet, PDF (1/9 Pages) Agilent(Hewlett-Packard) – DC-12 GHz High Efficiency GaAs HBT MMIC Divide-by-2 Prescaler

Agilent HMMC–3022
DC–12 GHz High Efficiency
GaAs HBT MMIC
Divide–by–2 Prescaler
1GC1-8009
Data Sheet
Features
• Wide Frequency Range:
0.2-12 GHz
• High Input Power Sensitivity:
On-chip pre- and post-amps
-20 to +10 dBm (1–8 GHz)
-15 to +10 dBm (8–10 GHz)
-10 to +4 dBm (10–12 GHz)
• Dual-mode Pout: (Chip Form)
0 dBm (0.5 V_p–p) @ 40 mA
-6.0 dBm (0.25 V_p–p) @ 30 mA
• Low Phase Noise:
-153 dBc/Hz @ 100 kHz Offset
• (+) or (-) Single Supply Bias
Operation
• Wide Bias Supply Range:
4.5 to 6.5 volt operating range
• Differential I/0 with on-chip
50 Ω matching
Description
The HMMC-3022 GaAs HBT MMIC
prescaler offers dc to 12 GHz frequen-
cy translation for use in communica-
tions and EW systems incorporating
high-frequency PLL oscillator circuits
and signal-path down conversion ap-
plications. The prescaler provides a
large input power sensitivity window
and low phase noise. In addition to
the features listed above the device
offers an input disable contact pad
to eliminate any self-oscillation
condition.
Chip Size:
1330 x 440 µm (52.4 x 17.3 mils)
Chip Size Tolerance: ± 10 µm (± 0.4 mils)
Chip Thickness: 127 ± 15 µm (5.0 ± 0.6 mils)
Pad Dimensions: 70 x 70 µm (2.8 x 2.8 mils)
Absolute Maximum Ratings¹
(@ T_A = 25°C, unless otherwise indicated)
Symbol
Parameters/Conditions
Min.
Max.
Units
V_CC
V_EE
V_CC - V_EE
V_Disable
V_Logic
P_in(CW)
V_RFin
T_BS2
T_st
T_max
Bias supply voltage
+7
volts
Bias supply voltage
-7
volts
Bias supply delta
0
+7
volts
Pre-amp disable voltage
Logic threshold voltage
CW RF input power
V_EE
V_CC -1.5
V_CC
V_CC -1.2
+10
volts
volts
dBm
DC input voltage
(@ RF_in or RF_in ports)
Backside operating temperature -40
V_CC ±0.5 volts
+85
°C
Storage temperature
-65
+165
°C
Maximum assembly temperature
(60 s max.)
310
°C
Notes
1. Operation in excess of any parameter limit (except T_BS) may cause permanent damage to the device.
2. MTTF > 1 x 10⁶ hours @ T_BS ≤ 85°C. Operation in excess of maximum operating temperature (T_BS) will degrade MTTF.