HLMP-J100 Datasheet, PDF (1/4 Pages) Agilent(Hewlett-Packard) – T-1 (3 mm) High Performance TS AlGaAs Red LED Lamps

H
T-1 (3 mm) High Performance
TS AlGaAs Red LED Lamps
Technical Data
HLMP- J100
HLMP-J105
HLMP-J150
HLMP-J155
Features
• High Light Output over a
Wide Range of Currents
(500 µA to 50 mA)
• Popular T-1 Package
• Low Forward Voltage
• Low Power Dissipation
• Deep Red Color
• Long Life: Solid State
Reliability
• Wide Viewing Angles
• Available on Tape and Reel
Applications
• Outdoor Message Boards
• Automotive Lighting
• Portable Equipment
• Safety Lighting Equipment
• Medical Equipment
• Changeable Message Signs
Package Dimensions
3.18 (0.125)
2.67 (0.105)
3.43 (0.135)
2.92 (0.115)
6.35 (0.250)
5.58 (0.220)
4.70 (0.185)
4.19 (0.165)
1.02 (0.040)
NOM.
ANODE
0.45 (0.018)
SQUARE
NOMINAL
CATHODE
25.40 (1.00)
MIN.
2.54 (0.100)
NOM.
1.27 (0.050)
NOM.
Device Selection Guide
Package Description
T-1 (3 mm), Untinted,
Non-diffused, Standard Current
T-1 (3 mm), Untinted,
Non-diffused, Low Current
T-1 (3 mm), Tinted, Diffused,
Standard Current
T-1, (3 mm), Tinted, Diffused,
Low Current
Viewing
Angle
2θ¹/2
45°
45°
55°
55°
Deep Red
λ_d = 644 nm
HLMP- J105
HLMP- J155
HLMP-J100
HLMP-J150
Description
The T-1 solid state lamps utilize a
highly optimized LED material
technology, transparent substrate
aluminum gallium arsenide (TS
AlGaAs). This LED technology
has a very high luminous
efficiency, capable of producing
high light output over a wide
range of drive currents (500 µA to
50 mA). The color is deep red at a
dominant wavelength of 644 nm.
TS AlGaAs is a flip-chip LED
technology, die attached to the
anode lead and wire bonded to
the cathode lead.
Typical
I_V (mcd)
I_F = 20 mA
340
–
175
–
Typical
I_V (mcd)
I_F = 0.5 mA
–
6
–
3
1-124
5964-9372E