HLMP-810X Datasheet, PDF (1/5 Pages) Agilent(Hewlett-Packard) – T-13/4 (5 mm) High Performance TS AlGaAs Red LED Lamps

H
T-1³/4 (5 mm) High Performance
TS AlGaAs Red LED Lamps
Technical Data
HLMP-810X Series
HLMP-C100
HLMP-C110
Features
• Exceptional Brightness
• Outstanding LED Material
Efficiency
• High Light Output Over a
Wide Range of Drive
Currents
• Viewing Angle: Narrow or
Wide
• Low Forward Voltage
• Low Power Dissipation
• CMOS/MOS Compatible
• Red Color
Package Dimensions
4.82 ± 0.25
(0.190 ± 0.010)
8.80 ± 0.38
(0.347 ± 0.015)
12.3 ± 0.5
(0.485 ± 0.020)
0.76 ± 0.13
(0.030 ± 0.005)
23.0 _MIN.
(0.90)
1.17 ± 0.15
(0.046 ± 0.006)
Description
These T-1³/4, untinted,
nondiffused lamps utilize a
highly optimized LED material
technology, transparent
substrate aluminum gallium
arsenide (TS AlGaAs). This
LED technology has a very high
luminous efficiency, capable of
producing high light output over
a wide range of drive currents
(500 µA to 50 mA). The color is
deep red at a dominant wave-
length of 644 nm. TS AlGaAs is
a flip-chip LED technology, die
attached to the anode lead and
wire bonded to the cathode lead.
4.82 ± 0.25
(0.190 ± 0.010)
8.80 ± 0.38
(0.347 ± 0.015)
11.3 ± 0.5
(0.445 ± 0.020)
0.76 ± 0.13
(0.030 ± 0.005)
23.0 _MIN.
(0.90)
1.17 ± 0.15
(0.046 ± 0.006)
8.70 ± 0.20
(0.343 ± 0.008)
1.14 ± 0.20
(0.045 ± 0.008)
31.4
(1.23)
MIN.
5.00 ± 0.20
(0.197 ± 0.008)
2.35
(0.093)
MAX.
0.70
(0.028)
MAX.
CATHODE
1.27
(0.050)
NOM.
0.64 SQUARE
(0.025) NOMINAL
1.27
(0.050)
NOM.
0.64 SQUARE
(0.025) NOMINAL
1.27
(0.050)
NOM.
0.50
(0.020
±
±
0.10
0.004)
SQUARE
CATHODE
5.80 ± 0.30
(0.228 ± 0.012)
2.54 _NOM.
(0.100)
CATHODE
5.80 ± 0.30
(0.228 ± 0.012)
2.54 _NOM.
(0.100)
HLMP-8100
HLMP-8102/-8103
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS/INCHES.
2. THE LEADS ARE MILD STEEL, SOLDER DIPPED.
3. AN EPOXY MENISCUS MAY EXTEND ABOUT 1 mm (0.040") DOWN THE LEADS, UNLESS OTHERWISE NOTED.
1-44
5.80 ± 0.20
(0.228 ± 0.008)
CATHODE
2.54
(0.100)
NOM.
HLMP-C100/-C110
5964-9291E