HLMP-7000 Datasheet, PDF (1/12 Pages) Agilent(Hewlett-Packard) – Standard SMT and Through Hole Lead Bend Options for Subminiature LED Lamps

Standard SMT and Through
Hole Lead Bend Options for
Subminiature LED Lamps
Technical Data
Option 11, 12, 21, 22, 31,
32, 1L, 1S, 2L, 2S
Features
• Surface Mount Lead
Configurations
• Right Angle Lead Bend for
Through Hole Mounting
• Tape and Reel in Accordance
with ANSI/EIA RS-481
Specifications
Description
Subminiature lamps (HLMx-Pxxx,
HLMX-Qxxx, HLMP-6xxx, HLMP-
70xx) are available with the
above standard options.
Subminiature Lamps with Options
11, 12, 21, 22, 31, and 32 are
suitable for surface mount
applications and their leads are
formed with gull wing, yoke bend
and Z bend respectively. They are
available in Tape and Reel
(compatible to ANSI/EIA RS-481)
or bulk. Options 1L, 1S, 2L, and
2S are right angle lead bends
suitable for through hole
applications.
Ordering Information
To order Subminiature Lamps
packaged with these standard
options, include the appropriate
option code along with the device
catalog part number. Example: to
order the HLMP-6300-F00xx with
Option 11 gull wing leads in
12 mm embossed tape on
178 mm (7 inch) diameter reels,
with 1500 lamps per reel; order
as follows: HLMP-6300-F0011.
Order quantities must be placed
in reel increments only. Orders
for partial reels will not be
accepted. For additional informa-
tion, please contact your local
Agilent Technologies sales office
or franchised distributor for
assistance.
HLMX-xxxx- x x x x x
Packaging
Option
Color Bin
Selection
Max. Iv Bin
Min. Iv Bin
4 x 4 Prod.
Part
Number