HLMP-6000-E00xx Datasheet, PDF (1/16 Pages) Agilent(Hewlett-Packard) – Subminiature LED Lamps

Agilent HLMP-Pxxx
Subminiature LED Lamps
Data Sheet
HLMP-Pxxx Series, HLMP-Qxxx Series
HLMP-6xxx Series, HLMP-70xx Series
Description
Flat Top Package
The HLMP-Pxxx Series flat top
lamps use an untinted, non-
diffused, truncated lens to
provide a wide radiation pattern
that is necessary for use in
backlighting applications. The
flat top lamps are also ideal for
use as emitters in light pipe
applications.
Dome Packages
The HLMP-6xxx Series dome
lamps for use as indicators use a
tinted, diffused lens to provide a
wide viewing angle with a high
on-off contrast ratio. High
brightness lamps use an
untinted, nondiffused lens to
provide a high luminous
intensity within a narrow
radiation pattern.
Resistor Lamps
The HLMP-6xxx Series 5 volt
subminiature lamps with built in
current limiting resistors are for
use in applications where space
is at a premium.
Lead Configurations
All of these devices are made by
encapsulating LED chips on
axial lead frames to form molded
epoxy subminiature lamp
packages. A variety of package
configuration options is avail-
able. These include special
surface mount lead configura-
tions, gull wing, yoke lead or
Z-bend. Right angle lead bends
at 2.54 mm (0.100 inch) and
5.08 mm (0.200 inch) center
spacing are available for through
hole mounting. For more
information refer to Standard
SMT and Through Hole Lead
Bend Options for Subminiature
LED Lamps data sheet.
Features
• Subminiature flat top package
– ideal for backlighting and light
piping applications
• Subminiature dome package
– diffused dome for wide viewing
angle
– nondiffused dome for high
brightness
• TTL and LSTTL compatible 5 volt
resistor lamps
• Available in six colors
• Ideal for space limited
applications
• Axial leads
• Available with lead configurations
for surface mount and through
hole PC board mounting