HLMA-SH05 Datasheet, PDF (1/5 Pages) Agilent(Hewlett-Packard) – 2 mm x 5 mm Rectangular AlInGaP Lamps

Agilent HLMA-SH05
2 mm x 5 mm Rectangular
AlInGaP Lamps
Data Sheet
Features
• Rectangular light emitting surface
• Excellent for flush mounting on
panels
• Long life: solid state reliability
• Excellent uniformity of light output
Description
The HLMA-SH05 is an epoxy
encapsulated lamp in rectangular
package which are easily stacked
in arrays or used for discrete
front panel indicators. Contrast
and light uniformity are enhanced
by a special epoxy diffusion and
tinting process.
Technology
This 2x5 rectangular solid state
lamp utilizes the newly developed
Aluminum Indium Gallium
Phosphide (AlInGaP) LED
technology. This material has a
very high luminous efficiency,
capable of producing high light
output over a wide range of drive
currents.
Device Selection Guide
Package Description
Rectangular, 2mm x 5 mm,
Tinted, Diffused
Viewing Angle
2q_1/2
110
Dominant
Wavelength
615 nm
Package Dimensions
5.18 (0.204)
4.93 (0.194)
5.46 (0.215)
4.95 (0.195)
CATHODE
LEAD
26.40 (1.00)
MIN.
1.27 (0.060)
NOMINAL
8.00 (0.315)
7.37 (0.290)
2.23 (0.088)
1.98 (0.078)
SIDE VIEW
2.41 (0.095)
2.03 (0.085)
0.46 (0.018) SQ.
NOMINAL
2.54 (0.100)
NOMINAL
BOTTOM VIEW
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. AN EPOXY MENISCUS MAY EXTEND ABOUT
1 mm (0.040") DOWN THE LEADS.
3. THERE IS A MAXIMUM 1° TAPER FROM
BASE TO THE TOP OF LAMP.