HFBR-5803 Datasheet, PDF (1/16 Pages) Agilent(Hewlett-Packard) – FDDI 100 Mb/s ATM and Fast Ethernet Transceivers in Low Cost 1 x 9 Package Style

HFBR-5803/5803T/5803A/5803AT
FDDI, 100 Mb/s ATM, and Fast Ethernet
Transceivers in Low Cost 1 x 9 Package
Style
Data Sheet
Description
The HFBR-5800 family of trans-
ceivers from Agilent provide the
system designer with products
to implement a range of Fast
Ethernet, FDDI and ATM
(Asynchronous Transfer Mode)
designs at the 100 Mb/s-125
MBd rate.
The transceivers are all supplied
in the industry standard 1 x 9
SIP package style with either a
duplex SC or a duplex ST*
connector interface.
FDDI PMD, ATM and Fast Ethernet
2 km Backbone Links
The HFBR-5803/5803T are
1300 nm products with optical
performance compliant with the
FDDI PMD standard. The FDDI
PMD standard is ISO/IEC
9314-3:
1990 and ANSI X3.166 - 1990.
These transceivers for 2 km
multimode fiber backbones are
supplied in the small 1 x 9
duplex SC or ST package style.
The HFBR-5803/-5803T is useful
for both ATM 100 Mb/s
interfaces and Fast Ethernet 100
Base-FX interfaces. The ATM
Forum User-Network Interface
(UNI) Standard, Version 3.0,
defines the Physical Layer for
100 Mb/s Multimode Fiber
Interface for ATM in Section 2.3
to be the FDDI PMD Standard.
Likewise, the Fast Ethernet
Alliance defines the Physical
Layer for 100 Base-FX for Fast
Ethernet to be the FDDI PMD
Standard.
ATM applications for physical
layers other than 100 Mb/s
Multimode Fiber Interface are
supported by Agilent. Products
are available for both the single
mode and the multimode fiber
SONET OC-3c (STS-3c) ATM
interfaces and the 155 Mb/s-194
MBd multimode fiber ATM
interface as specified in the ATM
Forum UNI.
Contact your Agilent sales
representative for information
on these alternative Fast
Ethernet, FDDI and ATM
products.
Ordering Information
The HFBR-5803/5803T/5803A/
5803AT 1300 nm products are
available for production orders
through the Agilent Component
Field Sales Offices and
Authorized Distributors world
wide.
0 °C to +70 °C
HFBR-5803/5803T
-10 °C TO +85 °C
HFBR-5803A/5803AT
Features
• Full compliance with the optical
performance requirements of the
FDDI PMD standard
• Full compliance with the FDDI
LCF-PMD standard
• Full compliance with the optical
performance requirements of the
ATM 100 Mb/s physical layer
• Full compliance with the optical
performance requirements of
100 Base-FX version of IEEE 802.3u
• Multisourced 1 x 9 package style
with choice of duplex SC or
duplex ST* receptacle
• Wave solder and aqueous wash
process compatible
• Manufactured in an ISO 9002
certified facility
• Single +3.3 V or +5 V power
supply
Applications
• Multimode fiber backbone links
• Multimode fiber wiring closet to
desktop links
• Very low cost multimode fiber
links from wiring closet to
desktop
• Multimode fiber media converters
*ST is a registered trademark of AT&T
Lightguide Cable Connectors.
Note: The “T” in the product numbers
indicates a transceiver with a duplex ST
connector receptacle.
Product numbers without a “T” indicate
transceivers with a duplex SC connector
receptacle.