|
HFBR-53A5VEM Datasheet, PDF (1/14 Pages) Agilent(Hewlett-Packard) – 3.3 V 1 x 9 Fiber Optic Transceivers for Gigabit Ethernet Low Voltage | |||
|
Agilent HFBR-53A5VEM/HFBR-53A5VFM
3.3 V 1 x 9 Fiber Optic Transceivers
for Gigabit Ethernet Low Voltage
Data Sheet
Description
The HFBR-53A5VM transceivers
from Agilent Technologies allow the
system designer to implement a
range of solutions for multimode
Gigabit Ethernet applications.
The overall Agilent transceiver
product consists of three sections:
the transmitter and receiver optical
subassemblies, an electrical
subassembly, and the package
housing which incorporates a
duplex SC connector receptacle.
Transmitter Section
The transmitter section of the
HFBR-53A5VEM/FM consists of an
850 nm Vertical Cavity Surface
Emitting Laser (VCSEL) in an
optical subassembly (OSA), which
mates to the fiber cable. The OSA is
driven by a custom, silicon bipolar
IC which converts differential PECL
compatible logic signals into an
analog laser diode drive current.
The high speed output lines are
internally ac-coupled and
differentially terminate with a 100 â¦
resistor.
Receiver Section
The receiver of the
HFBR-53A5VEM/FM includes a
GaAs PIN photo-diode mounted
together with a custom, silicon
bipolar transimpedance
preamplifier IC in an OSA. This
OSA is mated to a custom silicon
bipolar circuit that provides post-
amplification and quantization.
The post-amplifier also includes a
Signal Detect circuit which pro-
vides a TTL logic-high output
upon detection of a usable input
optical signal level. The high
speed output lines are internally
ac-coupled.
Features
⢠Compliant with specifications for
IEEE- 802.3z Gigabit Ethernet
⢠Industry standard mezzanine height
1 x 9 package style with integral
duplex SC connector
⢠Performance
HFBR-53A5VEM/FM:
220 m links in 62.5/125 µm MMF
160 MHz* km cables
275 m links in 62.5/125 µm MMF
200 MHz* km cables
500 m links in 50/125 µm MMF
400 MHz* km cables
550 m links in 50/125 µm MMF
500 MHz* km cables
⢠IEC 60825-1 Class 1/CDRH Class I
laser eye safe
⢠Single +3.3 V power supply
operation with PECL compatible
logic interfaces and TTL Signal
Detect
⢠Wave solder and aqueous wash
process compatible
Applications
⢠Switch to switch interface
⢠Switched backbone applications
⢠High speed interface for file servers
⢠High performance desktops
Related Products
⢠Physical layer ICs available for
optical or copper interface
(HDMP-1636A/1646A)
⢠Quad Serdes IC available for high-
density interface
⢠Versions of this transceiver module
also available for +5 V operation
(HFBR/HFCT-53D5)
⢠MT-RJ SFF fiber optic transceivers
for Gigabit Ethernet
(HFBR/HFCT-5912E)
⢠Gigabit Interface Converters (GBIC)
Gigabit Ethernet SX-HFBR-5601 /
LX-HFCT-5611
|
▷ |