HFBR-53A3VEM Datasheet, PDF (1/14 Pages) Agilent(Hewlett-Packard) – 3.3 V 1 x 9 Fiber Optic Transceivers for Fibre Channel for Fibre Channel

Agilent HFBR-53A3VEM/HFBR-53A3VFM
3.3 V 1 x 9 Fiber Optic Transceivers
for Fibre Channel
Data Sheet
Description
The HFBR-53A3VEM/FM
transceivers from Agilent
Technologies allow the system
designer to implement a range of
solutions for multimode Fibre
Channel applications.
The overall Agilent transceiver
product consists of three sections:
the transmitter and receiver optical
subassemblies, an electrical
subassembly, and the package
housing which incorporates a
duplex SC connector receptacle.
Transmitter Section
The transmitter section of the
HFBR-53A3VEM/FM consists of an
850 nm Vertical Cavity Surface
Emitting Laser (VCSEL) in an
Optical Subassembly (OSA), which
mates to the fiber cable. The OSA is
driven by a custom, silicon bipolar
IC which converts differential PECL
compatible logic signals into an
analog laser diode drive current.
The high speed output lines are
internally ac-coupled and
differentially terminate with a 100 Ω
resistor.
Receiver Section
The receiver of the
HFBR-53A3VEM/FM includes a
GaAs PIN photo-diode mounted
together with a custom, silicon
bipolar transimpedance
preamplifier IC in an OSA. This
OSA is mated to a custom silicon
bipolar circuit that provides post-
amplification and quantization.
The post-amplifier also includes a
Signal Detect circuit which pro-
vides a TTL logic-high output
upon detection of a usable input
optical signal level. The high
speed output lines are internally
ac-coupled.
Features
• Compliant with ANSI X3.297-1996
Fibre Channel Physical Interface
FC-PH-2 revision 7.4 proposed
specification for 100-M5-SN-I and
100-M6-SN-I signal interfaces
• Performance
HFBR-53A3VEM/FM:
300 m links in 62.5/125 µm MMF cables
500 m links in 50/125 µm MMF cables
• Wave solder and aqueous wash
process compatible
• Industry standard mezzanine height
1 x 9 package style with integral
duplex SC connector
• IEC 60825-1 Class 1/CDRH Class I
laser eye safe
• Single +3.3 V power supply operation
with PECL compatible logic
interfaces and TTL Signal Detect
Applications
• Mass storage systems I/O
• Computer systems I/O
• High-speed peripheral interface
• High-speed switching systems
• Computer systems I/O
• Host adapter I/O
• RAID cabinets
Related Products
• Physical layer ICs available for
optical or copper interface
(HDMP-1636A/1646A)
• Versions of this transceiver module
also available for +5 V operation
(HFBR/HFCT-53D3)
• MT-RJ SFF fiber optic transceivers
for Fibre Channel
(HFBR-HFCT-5910E)
• Gigabit Interface Converters (GBIC)
for Fibre Channel: HFBR-5602 (SWL)
and HFCT-5612 (LWL)