HFBR-1116T Datasheet, PDF (1/11 Pages) Agilent(Hewlett-Packard) – Fiber Optic Transmitter and Receiver Data Links for 155 MBd

Fiber Optic Transmitter
and Receiver Data Links
for 155 MBd
Technical Data
HFBR-1116T Transmitter
HFBR-2116T Receiver
Features
• Full Compliance with the
Optical Performance
Requirements of the ATM
Forum UNI SONET OC-3
Multimode Physical Layer
Specification
• Other Versions Available for:
- FDDI
- Fibre Channel
• Compact 16-pin DIP Package
with Plastic ST* Connector
• Wave Solder and Aqueous
Wash Process Compatible
Package
• Manufactured in an ISO
9001 Certified Facility
Applications
• ATM Switches, Hubs, and
Network Interface Cards
• Multimode Fiber ATM
Wiring Closet-to-Desktop
Links
• Point-to-Point Data
Communications
• Replaces DLT/R1040-ST1
Model Transmitters and
Receivers
Description
The HFBR-1116/-2116 series of
data links are high-performance,
cost-efficient, transmitter and
receiver modules for serial
optical data communication
applications specified at 155 MBd
for ATM UNI applications.
These modules are designed for
50 or 62.5 µm core multimode
optical fiber and operate at a
nominal wavelength of 1300 nm.
They incorporate our high-
performance, reliable, long-
wavelength, optical devices and
proven circuit technology to give
long life and consistent
performance.
Transmitter
The transmitter utilizes a 1300 nm
surface-emitting InGaAsP LED,
packaged in an optical subassem-
bly. The LED is dc-coupled to a
custom IC which converts
differential-input, PECL logic
signals, ECL-referenced (shifted)
to a +5 V power supply, into an
analog LED drive current.
Receiver
The receiver utilizes an InGaAs
PIN photodiode coupled to a
custom silicon transimpedance
preamplifier IC. The PIN-
preamplifier combination is ac-
coupled to a custom quantizer IC
which provides the final pulse
shaping for the logic output and
the Signal Detect function. Both
the Data and Signal Detect
Outputs are differential. Also,
both Data and Signal Detect
Outputs are PECL compatible,
ECL-referenced (shifted) to a
+5 V power supply.
Package
The overall package concept for
the Data Links consists of the
following basic elements: two
optical subassemblies, two
electrical subassemblies, and the
outer housings as illustrated in
Figure 1.
*ST is a registered trademark of AT&T Lightguide Cable Connectors.
189
5965-3482E (8/96)