HDSP-50XB Datasheet, PDF (1/4 Pages) Agilent(Hewlett-Packard) – 14.2 mm (0.56 inch) General Purpose Blue Seven Segment Displays

14.2 mm (0.56 inch) General Purpose
Blue Seven Segment Displays
Technical Data
HDSP-50xB Series
Features
• Industry Standard Size
• Industry Standard Pin-Out
15.24 mm (0.6 in.) DIP Leads
on 2.54 mm (0.1 in.) Centers
• Blue Color
• Mitered Font
Mitered Corners on Segments
• Gray Face Paint
Gray Package Gives Optimum
Contrast
• ± 50° Viewing Angle
• Design Flexibility
Common Anode or Common
Cathode
• Categorized for Luminous
Intensity
Applications
• Suitable for Indoor Use
• Not Recommended for
Industrial Applications, i.e.
Operating Temperatures
Devices
Blue
HDSP- Description
501B Common Anode Right
Hand Decimal
503B Common Cathode
Right Hand Decimal
Note:
1. For details, please contact your local
Agilent components sales office or an
authorized distributor.
Requirements Exceeding
80°C or Below –20°C^[1]
• Extreme Temperature
Cycling Not Recommended^[1]
Description
These 14.2 mm (0.56 inch) blue
displays use industry standard size
and pin-out. The devices are
available as either common anode
or common cathode. The
HDSP-50xB series are suitable for
indoor use.
Part Numbering System
5082 - X XX X - X X X XX
HDSP - X XX X - X X X XX
Mechanical Options^[1]
00: No Mechanical Option
Color Bin Options^[1,2]
0: No Color Bin Limitation
Minimum Intensity Bin^[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin^[1,2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color^[1]
B: Blue
Device Specification Configuration^[1]
Refer to Respective Datasheet
Package^[1]
Refer to Respective Datasheet
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or
contact your nearest Agilent representative for details.
2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are
typically restricted to 1 bin per tube (exceptions may apply). Please refer to
respective datasheet for specific bin limit information.