HCPL-8100 Datasheet, PDF (1/11 Pages) Agilent(Hewlett-Packard) – High Current Line Driver

Agilent HCPL-8100/0810
High Current Line Driver
Data Sheet
Description
The HCPL-8100 and HCPL-
0810 are low-cost high current
line drivers. With a 5 V single
supply, they deliver up to 1
A_PP current. This is ideal for
high current applications such
as a Powerline modem.
The HCPL-8100 and HCPL-
0810 are internally protected
against over-temperature
conditions through thermal
shutdown. Under-voltage or
over-load condition is sensed
by internal detection circuit
Connection Diagram
and indicated by Status pin
output. In addition, with the
transmit enable (Tx-en) input,
the line driver output stage
can be disabled to reduce
power dissipation when not
operating.
The HCPL-8100 and HCPL-
0810 are specified for
operation over extended
temperature range from
-40°C to +85°C. The HCPL-
8100 is available in DIP-8
package, and the HCPL-0810 is
available in SO-8 package.
Features
• 1 A_PP driving current
• 3.5 MHz gain bandwidth product
• − 60 dB maximum harmonic
distortion
• Load detection function
• Under-voltage detection
• Over-temperature shutdown
• 5 V single supply
• Temperature range: −40°C to
+85°C
• Suitable for FCC Part 15 and
EN50065-1 compliant design
Applications
• Automatic meter reading (AMR)
• Powerline modem
• General purpose line driver
• Signal conditioning
• Digital-to-analog converter
buffers
STATUS
1
Status
8
Tx -out
L
TX -EN
2
Tx -en
7
V CC
5V
TX Filter
3 _{Tx -in}
GND ⁶
PLM
Transceiver
4
R ref
5
GND
N
HCPL-8100/0810
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and /or degradation which may be induced by ESD.