E1736A Datasheet, PDF (1/1 Pages) Agilent(Hewlett-Packard) – USB Sensor Hub

E1736A USB Sensor Hub
Data Sheet
This Sensor Hub provides the interface for the Agilent E1737A Material Sensor and
Agilent E1738A Air Temperature/Pressure/Humidity Sensor used with the Agilent
5530 Dynamic Calibrator system. These sensors monitor parameters in the
environment of the device being calibrated to enable the laser system to calculate
appropriate correction factors. The E1736A can accommodate multiple sensors of
both types. The axis module interfaces with the system PC via a standard high-speed
USB 2.0 interface.
Specifications of the Sensor Hub (E1736A):
- Measurement Range:
air temperature
0 - 40°C (32 – 104°F)
material temperature
0 - 55°C (32 – 131°F)
air pressure
70 – 110 kPa (10.2 – 16.0 psia)
relative humidity
10 – 90%
- Measurement Resolution:
air/material temperature
0.004°C (0.007°F)
air pressure
5 Pa (0.001 psi)
relative humidity
- Refresh Rate:
1%
per 15 sec
- Dimensions:
102 x 63 x 24 mm (4.02 x 2.48 x 0.95 in)
- Weight:
200g (0.44 lb)
Printed in the USA February 2, 2009
5989-9709EN
Additional information is available at:
www.agilent.com/find/5530A