E1418A Datasheet, PDF (1/4 Pages) Agilent(Hewlett-Packard) – 8/16-Channel D/A Converter

Agilent E1418A
8/16-Channel D/A Converter
Data Sheet
Features
• 1-Slot, C-size, register based
• 8/16 independent channels,
flexible and configurable
• Individual isolation per channel
• 16-bit resolution D/A per channel
• Programmable selectable
voltage/current modes
• Software controlled calibration
Description
The Agilent E1418A 8/16-Channel
D/A Converter is a C–size, 1-slot,
register-based VXI module. It
consists of 8 or 16 fully inde-
pendent, isolated or non-isolated,
16-bit D/As. Each channel can
be set to voltage or current mode
with local or remote sensing
on voltage outputs. All outputs
can be updated with register-
level programming to allow fast
backplane access. Each channel
can be updated individually, or
by using the internal data buffer,
synchronized so that all channels
change simultaneously. The
channel output mode is set with
jumpers in the terminal block
for each channel or by register
programming. Each D/A converter
can be calibrated without removal
through software commands and
use of the terminal block CALBUS
in conjunction with a 5.5-digit
multimeter. The on/off terminal
block has standard screw termi-
nals for field wiring.
Refer to the Agilent Technologies
Website for instrument driver
availability and downloading
instructions, as well as for recent
product updates, if applicable.