AMMC-6345 Datasheet, PDF (1/10 Pages) Agilent(Hewlett-Packard) – 20 - 45 GHz Driver Amplifier

Agilent AMMC-6345
20 – 45 GHz Driver Amplifier
Data Sheet
Description
The AMMC-6345 MMIC is a
broadband medium power
amplifier designed for use in
driving stage for transmitters
that operate in various
frequency bands between
20GHz and 45GHz. It can be
attached to the driving stage of
the AMMC-6425, 6430, and
6440 (18-27 GHz, 25-32GHz,
and 37-42GHz) 1W MMIC
power amplifiersluding
requiring linear operation. At
40GHz, it provides 24dBm of
output power (P-1dB), 20dB of
gain, and a 32 dBm output
Chip Size: 2500 x 1150 mm (100 x 69 mils)
Chip Size Tolerance: ± 10mm (±0.4 mils)
Chip Thickness: 100 ± 10mm (4 ± 0.4 mils)
Pad Dimensions: 100 x 100 mm (4 ± 0.4 mils)
third order intercept (OIP3).
The device has input and
output matching circuitry for
use in 50 Ω environments.
The AMMC-6345 integrates a
temperature compensated RF
power detection circuit that
enables power detection of
0.8V/W at 40GHz. The device
operates on 5V for current
supply (negative voltage only
needed for Vg). It is fabricated
in a PHEMT process for
exceptional power and gain
performance.
Features
• Wide frequency range: 20 - 45 GHz
• High gain: 20 dB
• Power: @40 GHz, P-1dB=24 dBm
• Highly linear: OIP3=32dBm
• Integrated RF power detector
• 5.0 Volt, -0.7 Volt, 480mA
operation
Applications
• Microwave Radio systems
• Satellite VSAT and DBS systems
• LMDS & Pt-Pt mmW Long Haul
• 802.16 & 802.20 WiMax BWA
• WLL and MMDS loops
• Commercial grade military
• Can be driver amplifier for the
AMMC-64xx power amplifiers
AMMC-6345 Absolute Maximum Ratings^[1]
Symbol
Parameters/Conditions Units
Min.
V_d
Positive Drain Voltage
V
V_g
Gate Supply Voltage
V
-3
I_d
Drain Current
mA
P_in
CW Input Power
dBm
T_ch
Operating Channel Temp. °C
T_stg
Storage Case Temp.
°C
-65
T_max
Maximum Assembly Temp °C
(60 sec max)
Note:
1. Operation in excess of any one of these conditions may result in permanent damage to this device.
Max.
7
0.5
700
23
+150
+150
+300
Note: These devices are ESD sensitive. The following precautions are strongly recommended.
Ensure that an ESD approved carrier is used when dice are transported from one destination to
another. Personal grounding is to be worn at all times when handling these devices