AMMC-6231 Datasheet, PDF (1/8 Pages) Agilent(Hewlett-Packard) – 16-32 GHz Low Noise Amplifier

Agilent AMMC-6231
16–32 GHz Low Noise Amplifier
Data Sheet
Features
• Wide frequency range: 16 - 32 GHz
• High gain: 22 dB
• Low 50 Ω Noise Figure: 2.6 dB
Chip Size: 1900 x 800 mm (74.8 x 31.5 mils)
Chip Size Tolerance: ± 10mm (± 0.4 mils)
Chip Thickness: 100 ± 10mm (4 ± 0.4 mils)
• 50 Ω Input and Output Match
• Flat Gain Response
RF Pad Dimensions: 110 x 90 mm (4.33 x 3.54 mils)
DC Pad Dimensions: 100 x 100 mm (3.94 x 3.94 mils)
•
Single 3V Supply Bias
Applications
Description
Agilent’s AMMC-6231 is a high
gain, low-noise amplifier that
operates from 16 GHz to 32
GHz. This LNA provides a
wide-band solution for system
design since it covers several
bands, thus, reduces part
inventory. The device has
input / output match to 50
Ohm, is unconditionally stable
and can be used as either
primary or sub-sequential low
noise gain stage. By
eliminating the complex tuning
and assembly processes
typically required by hybrid
(discrete-FET) amplifiers, the
AMMC-6231 is a cost-effective
alternative in the 16 - 32 GHz
communications receivers. The
backside of the chip is both
RF and DC ground. This helps
simplify the assembly process
and reduces assembly related
performance variations and
costs. It is fabricated in a
PHEMT process to provide
exceptional noise and gain
performance.
• Microwave Radio systems
• Satellite VSAT, DBS Up/Down
Link
• LMDS & Pt-Pt mmW Long Haul
• Broadband Wireless Access
(including 802.16 and 802.20
WiMax)
• WLL and MMDS loops
• Commercial Grade Military
AMMC-6231 Absolute Maximum Ratings^[1]
Symbol Parameters/Conditions
Units Min. Max.
V_d
Positive Drain Voltage
V
7
V_g
Gate Supply Voltage
V
NA
I_d
Drain Current
mA
100
P_in
CW Input Power
dBm
15
T_ch
Operating Channel Temp.
°C
+150
T_stg
Storage Case Temp.
°C -65 +150
T_max
Maximum Assembly Temp (60 sec max) °C
+300
Note:
1. Operation in excess of any one of these conditions may result in permanent damage to this device.
Note: These devices are ESD sensitive. The following precautions are strongly recommended. Ensure that an ESD approved
carrier is used when dice are transported from one destination to another. Personal grounding is to be worn at all times when
handling these devices. For more details, refer to Agilent Application Note A004R: Electrostatic Discharge Damage and Control.
ESD Machine Model (Class A)
ESD Human Body Model (Class 0)