AFBR-5803Z Datasheet, PDF (1/16 Pages) Agilent(Hewlett-Packard) – FDDI, 100 Mb/s ATM, and Fast Ethernet Transceivers in Low Cost 1 x 9 Package Style

AFBR-5803Z/5803TZ/5803AZ/5803ATZ
FDDI, 100 Mb/s ATM, and Fast Ethernet
Transceivers in Low Cost 1 x 9 Package
Style
Data Sheet
Description
The AFBR-5800Z family of
transceivers from Agilent
provide the system designer
with products to implement a
range of Fast Ethernet, FDDI
and ATM (Asynchronous
Transfer Mode) designs at the
100 Mb/s-125 MBd rate.
The transceivers are all
supplied in the industry
standard 1 x 9 SIP package
style with either a duplex SC
or a duplex ST* connector
interface.
FDDI PMD, ATM and Fast Ethernet
2 km Backbone Links
The AFBR-5803Z/5803TZ are
1300 nm products with optical
performance compliant with
the FDDI PMD standard. The
FDDI PMD standard is ISO/IEC
9314-3:
1990 and ANSI X3.166 - 1990.
These transceivers for 2 km
multimode fiber backbones are
supplied in the small 1 x 9
duplex SC or ST package style.
The AFBR-5803Z/5803TZ is
useful for both ATM 100 Mb/s
interfaces and Fast Ethernet
100 Base-FX interfaces. The
ATM Forum User-Network
Interface (UNI) Standard,
Version 3.0, defines the
Physical Layer for 100 Mb/s
Multimode Fiber Interface for
ATM in Section 2.3 to be the
FDDI PMD Standard. Likewise,
the Fast Ethernet Alliance
defines the Physical Layer for
100 Base-FX for Fast Ethernet
to be the FDDI PMD Standard.
ATM applications for physical
layers other than 100 Mb/s
Multimode Fiber Interface are
supported by Agilent. Products
are available for both the
single mode and the multi-
mode fiber SONET OC-3c
(STS-3c) ATM interfaces and
the 155 Mb/s-194 MBd multi-
mode fiber ATM interface as
specified in the ATM Forum
UNI.
Contact your Agilent sales
representative for information
on these alternative Fast
Ethernet, FDDI and ATM
products.
Features
• Full compliance with the optical
performance requirements of the
FDDI PMD standard
• Full compliance with the FDDI
LCF-PMD standard
• Full compliance with the optical
performance requirements of the
ATM 100 Mb/s physical layer
• Full compliance with the optical
performance requirements of
100 Base-FX version of IEEE 802.3u
• Multisourced 1 x 9 package style
with choice of duplex SC or
duplex ST* receptacle
• Wave solder and aqueous wash
process compatible
• Single +3.3 V or +5 V power
supply
• RoHS Compliance
Applications
• Multimode fiber backbone links
• Multimode fiber wiring closet to
desktop links
• Very low cost multimode fiber
links from wiring closet to
desktop
• Multimode fiber media converters
*ST is a registered trademark of AT&T
Lightguide Cable Connectors.