ABA-53563 Datasheet, PDF (1/8 Pages) Agilent(Hewlett-Packard) – 3.5 GHz Broadband Silicon RFIC Amplifier

Agilent ABA-53563
3.5 GHz Broadband Silicon
RFIC Amplifier
Data Sheet
Description
Agilent’s ABA-53563 is an
economical, easy-to-use, inter-
nally 50-ohm matched silicon
monolithic amplifier that offers
excellent gain and flat broadband
response from DC to 3.5 GHz.
Packaged in an ultraminiature
industry-standard SOT-363
package, it requires half the board
space of a SOT-143 package.
At 2 GHz, the ABA-53563 offers a
small-signal gain of 21.5 dB,
output P1dB of 12.7 dBm and
22.9 dBm output third order
intercept point. It is suitable for
use as buffer amplifiers for
wideband applications. They are
designed for low cost gain blocks
in cellular applications, DBS
tuners, LNB and other wireless
communications systems.
Surface Mount Package
SOT-363 /SC70
Pin Connections and
Package Marking
GND 1
GND 2
Input
Output
& Vcc
GND 3
Vcc
Note:
Top View. Package marking provides orientation
and identification. “x” is character to identify
date code.
Features
• Operating frequency: DC ~ 3.5 GHz
• 21.5 dB gain
• VSWR < 2.0 throughout operating
frequency
• 12.7 dBm output P1dB
• 3.5 dB noise figure
• Unconditionally stable
• Single 5V supply (Id = 46 mA)
Applications
• Amplifier for cellular, cordless,
special mobile radio, PCS, ISM,
wireless LAN, DBS, TVRO, and TV
tuner applications
ABA-53563 is fabricated using
Agilent’s HP25 silicon bipolar
process, which employs a double-
diffused single polysilicon
process with self-aligned submi-
cron emitter geometry. The
process is capable of simulta-
neous high f_T and high NPN
breakdown (25 GHz f_T at 6V
BVCEO). The process utilizes
industry standard device oxide
isolation technologies and
submicron aluminum multilayer
interconnect to achieve superior
performance, high uniformity,
and proven reliability.
Simplified Schematic
Vcc
RF
Input
Ground 2
Ground 3
RF
Output
& Vcc
Ground 1