5530 Datasheet, PDF (1/14 Pages) Agilent(Hewlett-Packard) – Dynamic Calibrator

Agilent 5530
Dynamic Calibrator
Data Sheet
Power Requirements
Laser Head:
100 – 240 Vac, 50/60 Hz
50W (during warmup), 33W (after warmup)
Calibrator Electronics (all +5V via USB):
E1735A 280 mA max (plus 55290B if used)
E1736A 120 mA (plus sensors)
E1737A 6 mA maximum, 0.3 mA typical
E1738A 6 mA maximum, 0.6 mA typical
55290B 250 mA maximum
System Requirements
Environmental
Operating Temperature: 0 – 40°C (32 – 104°F)
Optics temperature must be stabilized to ±2°C to
achieve accuracy specifications.
PC Requirements
Compatible with any portable computer
with Windows® XP or Windows Vista (32-bit)
and two USB 2.0 ports and a CD drive
“Windows” is a registed trademark of Microsoft, Inc.
55290 B
Rotary Table
CAUTION
LASER LIGHT
DO NOT STARE INTO BEAM
MAXIMUM OUTPUT: 1 mw
PULSE SPEC: continuous wave
LASER MEDIUM: helium neon
CLASS II LASER PRODUCT
A-quad-B
Cable
E1735A
USB Axis Module
5519A/B
Laser
10888A
Remote
E1738A
Air Sensor
E1736A
USB Sensor Hub
one to three
E1737A
Material Sensors