English
Language : 

5082-7300 Datasheet, PDF (1/6 Pages) Agilent(Hewlett-Packard) – Hexadecimal and Numeric Indicators
Hexadecimal and Numeric
Indicators
Technical Data
5082-7300
5082-7302
5082-7304
5082-7340
Features
• Numeric 5082-7300/-7302
0-9, Test State, Minus Sign,
Blank States
Decimal Point
7300 Right Hand D.P.
7302 Left Hand D.P.
• Hexadecimal 5082-7340
0-9, A-F, Base 16 Operation
Blanking Control, Conserves
Power
No Decimal Point
• DTL/TTL Compatible
• Includes Decoder/Driver with
5-Bit Memory
8421 Positive Logic Input
• 4 x 7 Dot Matrix Array
Shaped Character, Excellent
Readability
• Standard Dual-in-Line
Package Including Contrast
Filter
15.2 mm x 10.2 mm (0.6 inch
x 0.4 inch)
• Categorized for Luminous
Intensity
Assures Uniformity of Light
Output from Unit to Unit
within a Single Category
Description
Agilent’s 5082-7300 series solid
state numeric and hexadecimal
indicators with on-board decoder/
driver and memory provide 7.4 mm
(0.29 inch) displays for reliable,
low-cost methods of displaying
digital information.
The 5082-7300 numeric indicator
decodes positive 8421 BCD logic
inputs into characters 0-9, a “–”
sign, a test pattern, and four
blanks in the invalid BCD states.
The unit employs a right-hand
decimal point.
Package Dimensions
1.5
(0.06)
5082-7300
10.2 MAX.
(0.400)
7.4
(0.29)
5.6
(0.22)
14.0
(0.55)
1.5
(0.06)
5082-7302
10.2 MAX.
(0.400)
5.6
(0.22)
1.5
(0.06)
5082-7340
10.2 MAX.
(0.400)
7.4
(0.29) 14.0
(0.55)
7.4
(0.29)
14.0
(0.55)
4.8
(0.19)
5°
3.0
(0.12)
3.6
(0.14)
4.8
(0.19)
5678
10.2
(0.400)
X
5082
7300
YYWW
4321
LUMINOUS
INTENSITY
CATEGORY
15.2
(0.600)
DATE CODE
PIN 1 KEY
2.8
(0.11)
4.3
(0.17)
5°
0-10°
SEATING
PLANE
3.8
SEATING (0.15)
PLANE
0.3 ± 0.08 TYP.
(0.012 ± 0.003)
1.3 TYP.
(0.050)
5°
4.8
(0.19)
1.5
(0.06)
3.4
(0.135)
0.5 ± 0.08 TYP.
(0.020 ± 0.003)
2.5 ± 0.13 TYP.
(0.10 ± 0.005)
FUNCTION
5082-7300
PIN and 7302
5082-7340
NUMERIC HEXADECIMAL
1 INPUT 2
INPUT 2
2 INPUT 4
INPUT 4
3 INPUT 8
INPUT 8
4 DECIMAL BLANKING
POINT
CONTROL
5 LATCH
ENABLE
LATCH
ENABLE
6 GROUND
7
VCC
8 INPUT 1
GROUND
VCC
INPUT 1
NOTES:
1. DIMENSIONS IN MILLIMETERS
AND (INCHES).
2. UNLESS OTHERWISE SPECIFIED,
THE TOLERANCE ON ALL
DIMENSIONS IS ± 0.38 mm
(± 0.015 INCH).
3. DIGIT CENTER LINE IS ± 0.25 mm
(± 0.01 INCH) FROM PACKAGE
CENTER LINE.
 ▷