English
Language : 

M1 Datasheet, PDF (1/2 Pages) Won-Top Electronics – 1.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER
Plastic-Encapsulate Diodes
1.0 AMP. Surface Mount Rectifiers
FEATURES
For surface mounted application
Low forward voltage drop
High current capability
Easy pick and place
High surge current capability
Plastic material used carries Underwriters
Laboratory Classification 94V-0 260oC / 10 seconds at terminals
High reliability grade (AEC Q101 qualified)
M1---M7
0
52 32
7 4.50
MECHANICAL DATA
Case: Molded plastic
Terminals: Pure tin plated, lead free
solderable per J-STD-002B and JESD22-B102D.
Polarity: Indicated by cathode band
Packaging: 12mm tapeper EIA STD RS-481
Weight: 0.064 gram
DO-214AC (SMA)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For
capacitive load, derate current by 20%.
Parameter
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current at
TL =100 OC
Symbols M1 M2 M3 M4 M5 M6 M7 Unit
VRRM 50 100 200 400 600 800 1000 V
VRMS 35
70 140 280 420 560 700 V
VDC
50 100 200 400 600 800 1000 V
I(A)
1
A
Peak Forward Surge Current 8.3ms Single Half
Sine-wave Superimposed on Rated Load (JEDEC
IFSM
30
A
mMeatxhiomdu)m Instantaneous Forward Voltage at 1 A
Maximum DC Reverse Current
TA = 25 OC
at Rated DC Blocking Voltage
Typical Junction Capacitance 1)
Maximum Thermal Resistance 2)
TA = 125 OC
Operating and Storage Temperature Range
1) Measured at 1MHz and applied reverse voltage of 4 V
2) 8 mm2 (0.013 mm thick) land areas
VF
IR
CJ
RθJL
TJ, TS
1.1
5
200
15
30
- 50 to + 150
V
µA
pF
OC/W
CO
GUANGDONG HOTTECH INDUSTRIAL CO,. LTD.
Page:P2-P1