HR3-4N Datasheet, PDF (4/4 Pages) –

HR3/4N
61.24/67.24MHz One-Port SAW Resonator For the US channel RF modulator
Vibration
Mechanical
Shock
Lead
Bending
Lead Pull
Vibration of 1000 rpm, amplitude 1.5mm
X, Y, Z, directions for 1 hour
3 trials of natural dropping from the height of 1 meter on
to an board
90° bending and returning to the initial position, twice,
0.5kg
Pulled 2kgs weight for 5 seconds towards an axis of each
terminal
Kept in the room temperature
and normal humidity for 1
hour Resonant Frequency
Shift|△fr | ≤45kH Resonator
Loss After test Ar≤6.0dB
Solderbility
Dipping terminals into Methanol (JIS-K-501)
of rosin(JIS-K-5902) Then, into molten
solder at 230+5℃ for 3+0.5℃ seconds
More than 95℅ of Terminal
surface Covered smooth solder
Tel:[phone] Fax:[phone] E-mail: [e-mail] http://www.hoperf.com
Page 4 of 4