RFM02 Datasheet, PDF (1/8 Pages) List of Unclassifed Manufacturers – Universal ISM Band FSK Transmitter

RFM02
Datasheet REV1.2
ISM BAND FSK TRANSMITTER MODULE
RFM02
（the purpose of this spec covers mainly for the
physical characteristic of the module, for register
configure and its related command info please refer
to RF02 data sheets）
RFM02
General Introduction
RFM02 is a low costing ISM band transmitter
module implemented with unique PLL approach. It
works with FSK modulated signal ranges from
433/868/915MHZ bands, comply with FCC, ETSI
regulation. The SPI interface is used to
communicate with microcontroller for parameter
setting. RFM02 works with RFM01 receiver module.
At 433MHZ band, the pair of module can work up to
300m in the free open air.
Features:
• Low costing, high performance and price ratio
• Tuning free during production
• FSK transmission
• PLL employed
• Fast PLL lock time
• High resolution PLL with 2.5 KHz step
• Programmable frequency deviation (from 30 kHz to 210 kHz, step 30 kHz)
• Programmable output power
• High data rate (up to 115.2 kbps with FSK modulation)
• Differential antenna output
• Automatic antenna tuning
• SPI interface
• Clock and reset signal output for external MCU use
• 10MHz crystal for PLL reference
• Programmable crystal load capacitor bank
• Wakeup timer
• low battery detection
• 2.2V - 5.4V power supply
• Low power consumption
• stand by current less than 0.3μA
Tel: [phone] Fax: [phone] E-mail: [e-mail] http://www.hoperf.com