HDPM01 Datasheet, PDF (1/19 Pages) List of Unclassifed Manufacturers – Integrated pressure sensor

HDPM01
· Integrated pressure sensor
· 300-1100hpa absolute Pressure Range
· ROHS compliant
· 11 coefficients for software compensation
stored on chip
· Full integration of 2-axis magnetic sensors and electronics
circuits resulting in less external components needed.
· I²C Slave, FAST (=400 KHz) mode
· Power up/down function available through I²C interface
· 2.4V~3.6V wide power supply operation supported
· SET/RESET strap drive
· 512counts/gauss
Description
HDPM01 module includes a pressure module and a compass module
The HDPM01 pressure module includes a piezo-resistive pressure sensor and an ADC interface. It
provides 16 bit word data for pressure and temperature related voltage. With the help of a highly
accurate calibration of the senor, 11 unique coefficients were stored on the chip, thus accurate pressure
and temperature reading can be realized. HM03 is a low power, low voltage device with automatic
power down switching. I²C Serial Interface is used for communications with a microprocessor. Sensor
packaging options are SMD (with metal cap)
The HDPMO1 is a dual-axis magnetic sensor, it is a complete sensing system with on-chip signal
processing and integrated I2C bus, allowing the device to be connected directly to a microprocessor
eliminating the need for A/D converters or timing resources. It can measure magnetic field with a full
range of ±2 gausses and a sensitivity of 512counts/gauss @3.0 V at 25°C.
Features
. Supply voltage 2.2v-3.6v
. -20°C to + 60°C operating range
. No external components required
. I²C digital output with 400 KHz, fast mode operation.
Applications
. Pressure measurement and control systems
. Mobile altimeter/barometer systems
. Weather forecast products
. Adventure or multi-mode watches
. Electronic Compass
. GPS Navigation
. Position Sensing
. Vehicle Detection
. Magnetometry
Tel: [phone] Fax: [phone] E-mail: [e-mail] http://www.hoperf.com
1