HRF-AT4610 Datasheet, PDF (4/8 Pages) Honeywell Solid State Electronics Center – 31.5 dB, DC-4GHz, 6 Bit Parallel Digital Attenuator

HRF-AT4610
Evaluation Circuit Board
Preliminary
Honeywell's evaluation board provides an
easy to use method of evaluating the RF
performance of our attenuator. Simply
connect power, DC and RF signals to be
measuring attenuator performance in less
than 10 minutes.
HRF-AT4610 Evaluation Board
Evaluation Circuit Board Layout Design Details
Item
PCB
Attenuator
Chip Capacitor
RF Connector
DC Pin
Description
Impedance Matched Multi-Layer FR4
HRF-AT4610 Digital Attenuator
Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V
Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector
Mil-Max Model 800-10-064-10-001 Header Pins
Evaluation Circuit Board Connections
Digital
VDD
Gnd Gnd
S5 S4 S3 S2 S1 S0 VSS
RF In
HRF-AT4610
Evaluation Board
Top View
RF Out
HRF-AT4610
Honeywell
“0” = CMOS Low, “1” = CMOS High
________________________________________________________________________________________________________
Web Site:
www.mysoiservices.com
Honeywell
Email:
[e-mail]
Solid State Electronics Center
12001 State Highway 55
2002 4610W
Published June 2002 Page 4
Plymouth, Minnesota 55441-4799
1-800-323-8295