DRM4000L-N00-232 Datasheet, PDF (3/4 Pages) Honeywell Solid State Electronics Center – DRM™4000L Dead Reckoning Module

DRM4000L
CONFIGURATION
Configuration information is stored internally in the microprocessor's flash memory. There are a finite number of write
cycles to the flash. The limit will not normally be reached if changes are made manually. Care should be taken if the
writing is performed automatically.
Default board orientation is +Y axis up and +Z axis forward. The axes are printed on the module circuit board near the
magnetic sensors. This orientation puts the module flat against the torso.
The default RS-232 baud rate is 19200.
A factory backup configuration is stored in the module. If an error is generated in the normal configuration, the backup
configuration can be read and saved.
The DRM4000L is stocked and ships in a standard configuration for RS-232 data inputs and outputs. The GPS
NMEA0183 data input interface will be maintained from DRM input to the output plus the DRM unique commands and
responses.
DRM4000L Basic Dimensions
www.honeywell.com
3