AML53-T20BB Datasheet, PDF (2/4 Pages) Honeywell Solid State Electronics Center – Manual Switches Covers for Paddle Switches

Manual Switches
Covers for Paddle Switches
AML55 Series
AML55 PADDLE SWITCH COVER ORDER GUIDE (All possible color combinations
may not be available.)
For AML15 and AML25 LED display.
See notes below
AML55-T
10
Y
R
Paddle
Switch
Cover Type
AML55-E
1/2 Cover
(For one LED)*
AML55-T
Display/Legend
Type
Transmitted Color
10 No Legend
20 With Legend
Cover Color – See notes below
1/2-cover,
or LED side of
two-piece covers*
Other side of
two piece covers
R
Red
Y
Yellow
G
Green
B
Blue
W
White
K
Black
L
Gray
R
Red
Y
Yellow
G
Green
B
Blue
W
White
K
Black
L
Gray
HOW TO ORDER LEGENDS
FOR PADDLE SWITCH COVERS
When specifying legended paddle switch
covers, submit a legend order sheet to
cover each catalog listing. These forms
identify the maximum number of lines per
area and the maximum characters per
line, based on the type size you request.
To insure proper legend orientation, pad-
dle switch housings (when viewed from
the panel front) should have the ‘‘MICRO
SWITCH’’ identification facing UP or to
the LEFT.
Legend order sheets for covers are
shown on the following pages. Repro-
duce them on your office copier or re-
quest a pad of them from the 800 num-
ber.:
Legend Sheet
Form No.
AML53 Covers
FO-63567
AML55 Covers
FO-63565
Two-Piece Cover
(For one LED)
AML55-H
Two-Piece Cover
(For two LED’s)
AML55-E, -T, and -H covers have an open
window which allows LED’s to be flush
with the cover surface.
* Notes:
1 _{Only one color code letter is necessary}
for AML55-E 1/2 covers.
2 _{To order a 1/2-cover without the LED}
‘‘window,’’ specify an AML53-E listing
from the previous page.
Example: AML55-T10YR
Two-piece cover; with LED window in one
side, transmitted color, no legend; yellow
(LED side) and red (non-LED side).
48
Honeywell ɀ Sensing and Control ɀ 1-800-537-6945 USA ɀ ⍣1-815-235-6847 International ɀ 1-800-737-3360 Canada