|
SDP8600 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – SDP86XX | |||
|
SDP86XX
Optoschmitt Detector
FEATURES
⢠Side-looking plastic package
⢠55¡ (nominal) acceptance angle
⢠Wide sensitivity ranges
⢠TTL/LSTTL/CMOS compatible
⢠Buffer (SDP8600/8601/8602) or inverting
(SDP8610/8611/8612) logic available
⢠Three different lead spacing arrangements
⢠Mechanically and spectrally matched to
SEP8506 and SEP8706 infrared emitting diodes
DESCRIPTION
The SDP86XX series is a family of single chip
Optoschmitt IC detectors molded in a side-looking black
plastic package to minimize the effect of visible ambient
light. The photodetector consists of a photodiode,
amplifier, voltage regulator, Schmitt trigger and an NPN
output transistor with a 10 kì (nominal) pull-up resistor.
Output rise and fall times are independent of the rate of
change of incident light. Detector sensitivity has been
internally temperature compensated. Flexibility of use is
enhanced by a choice of three different lead
configurations; in-line (SDP8601/8611), 0.05
in.(1.27 mm) offset pin circle (SDP8600/8610) and 0.10
in. (2.54 mm) offset center lead (SDP8602/8612).
Device Polarity:
Buffer - Output is HI when incident light intensity is
above the turn- on threshold level.
Inverter - Output is LO when incident light intensity is
above the turn- on threshold level.
INFRA--6.TIF
OUTLINE DIMENSIONS in inches (mm)
Tolerance 3 plc decimals ±0.005(0.12)
2 plc decimals ±0.020(0.51)
DIM_028.cdr
200
h
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.
|
▷ |