SDP8314-301 Datasheet, PDF (1/4 Pages) Honeywell Solid State Electronics Center – SDP Series Optoschmitt Detector, Side-looking Plastic Package

Datasheet -- SDP8314-301
Representative
photograph, actual
product appearance
may vary.
Due to regional
agency approval
requirements, some
products may not be
available in your area.
Please contact your
regional Honeywell
office regarding your
product of choice.
SDP8314-301
SDP Series Optoschmitt Detector, Side-looking Plastic
Package
Features
q Side-looking plastic package
q 55 ° (nominal) acceptance angle
q TTL/LSTTL/CMOS compatible
q Open collector output
q Buffer (SDP8304) or inverting (SDP8314) logic available
q High noise immunity output
q Mechanically and spectrally matched to SEP8506 and
SEP8706 infrared emitting diodes
Description
The SDP8304/8314 series consists of a high speed IC molded in a
side-looking black plastic package to minimize the effect of visible
ambient light. The detector incorporates a Schmitt trigger which
provides pulse shaping and hysteresis for noise immunity. Output
rise and fall times are independent of rate of change of incident
light. Detector sensitivity has been internally temperature
compensated. The output stage is an open collector NPN transistor.
This configuration allows the sensor to interface with circuit
elements driven by supply voltages other than the Vcc supply. For
additional output configuration options refer to SDP8004/8014 and
SDP8604/8614.
Device Polarity:
Buffer - Output is HI when incident light intensity is above the turn-
on threshold level.
Inverter - Output is LO when incident light intensity is above the
turn-on threshold level.
SDP8314-301
SDP Series Optoschmitt Detector, Side-looking Plastic Package
file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SDP8314-301.htm (1 of 4)14/03/2005 11:32:35 Õ