SDP8304 Datasheet, PDF (1/4 Pages) Honeywell Solid State Electronics Center – Optoschmitt Detector Open-Collector Output

SDP8304/8314
Optoschmitt Detector
Open-Collector Output
FEATURES
• Side-looking plastic package
• 55¡ (nominal) acceptance angle
• TTL/LSTTL/CMOS compatible
• Open collector output
• Buffer (SDP8304) or inverting (SDP8314) logic
available
• High noise immunity output
• Mechanically and spectrally matched to
SEP8506 and SEP8706 infrared emitting diodes
DESCRIPTION
The SDP8304/8314 series consists of a high speed IC
molded in a side-looking black plastic package to
minimize the effect of visible ambient light. The detector
incorporates a Schmitt trigger which provides pulse
shaping and hysteresis for noise immunity. Output rise
and fall times are independent of rate of change of
incident light. Detector sensitivity has been internally
temperature compensated. The output stage is an open
collector NPN transistor. This configuration allows the
sensor to interface with circuit elements driven by
supply voltages other than the VÙÙ supply. For
additional output configuration options refer to
SDP8004/8014 and SDP8604/8614.
Device Polarity:
Buffer - Output is HI when incident light intensity is
above the turn- on threshold level.
Inverter - Output is LO when incident light intensity is
above the turn- on threshold level.
INFRA--8.TIF
OUTLINE DIMENSIONS in inches (mm)
Tolerance 3 plc decimals ±0.005(0.12)
2 plc decimals ±0.020(0.51)
.060
(1.52)
.175
(4.45)
.030
(0.76)
.060
(1.52)
.045
(1.14)
.020 _{SQ. 3 PLCS}
(0.51)
~~~
GN_~D V_~o V_~cc
.045(1.14)
.025(.64)
.075
(1.91)
0.150
(3.81)
.225
(5.72)
.500
MIN
~~
(12.71)
DIM_026.ds4
188
h
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.