RDD100 Datasheet, PDF (1/2 Pages) Honeywell Solid State Electronics Center – Remote Digital Display

Remote Digital Display
RDD100
The RDD100 Remote Digital Display is a convenient, compact, and inexpensive accessory for displaying the
serial digital output from Honeywell’s Precision Pressure Transducers. PPT, PPTR, HPB or HPA pressure
readings are displayed by the RDD100 at distances up to 50 feet. Digital readings for any of the transducer’s
14 user-selectable pressure units, or custom user-specified unit, can be displayed.
Application
¾ Displays Honeywell Precision Pressure
Transducer serial digital output
¾ Compatible with RS-232 digital output from
Honeywell’s PPT, PPTR, HPB and HPA
transducers
¾ Bench top or panel mount installation
FEATURES AND BENEFITS
4 ^{Direct Output}
4 ^Accurate
4 ^{Easy to Use}
4 ^{Fast Setup}
4 ^{Computer Interface}
ISO-9001
ISO-14001
4 ^{The RDD100 collects and displays a continuous stream of RS-}
232 digital data directly from a PPT, PPTR, HPB, or HPA
transducer. (9600 Baud).
4 ^{No loss of accuracy as a result of signal conversion in the}
display.
4 ^{Simple setup; factory supplied interface cables; single wall}
mount power supply provides power for both the RDD100 and
pressure transducer.
4 ^{No additional hardware or wiring required.}
4 ^{Single 9-pin “D” cable connects the RDD100-transducer}
combination to your computer’s serial port allowing background
data collection while observing pressure transducer output.
Configuring the update rate, damping, and other parameters
can also be accomplished via the computer link.