HRF-SW1000 Datasheet, PDF (1/6 Pages) Honeywell Solid State Electronics Center – SPDT Absorptive RF Switch

HRF-SW1000
SPDT Absorptive RF Switch
Features
• High Isolation Of > 40 dB @ 2 GHz
• Low Insertion Loss Of 1.1dB @ 2 GHz
• DC To 4GHz Operating Frequency
• Integrated CMOS Control Logic
• Integrated ESD Protection on Digital I/O
• Single Positive Supply Voltage
• Ultra Small LPCC^TM Packaging
• Impedance matched for 50 Ohm systems
Product Description
The Honeywell HRF-SW1000 is a high performance
single pole double throw (SPDT) absorptive RF switch
that is ideal for use in wireless basestation and handset
applications that require minimum power and minimum
insertion loss.
The HRF-SW1000 is manufactured with Honeywell's
patented Silicon On Insulator (SOI) CMOS technology,
which provides the performance of GaAs with the
economy and integration capabilities of conventional
CMOS technology.
HRF-SW1000 in LPCC™ Package
RF Electrical Specifications @ + 25^oC
Results @ Vdd=5.0 =/- 10%, Vss = 0 unless otherwise stated, Z₀=50 ohms
Parameter
Test Condition
Frequency Minimum
Insertion Loss
DC – 0.5 GHz
2.0 GHz
3.0 GHz
Isolation
DC – 0.5 GHz
50
2.0 GHz
40
3.0 GHz
35
VSW R*
DC – 0.5 GHz
2.0 GHz
3.0 GHz
1dB Compression
Input Power
Vss=Gnd
1.0 GHz
Vss= -3
1.0 GHz
Input IP3
Two-Tone Inputs Up To + 5 dBm
Vss=Gnd
2.0 GHz
Vss= -3
2.0 GHz
Trise, Tfall*
10% To 90%
Ton, Toff
50% Cntl To 90%/10%Rf
Transients
In-Band
*By design
Typical
0.9
1.1
1.3
53.5
42.5
39.0
1.1:1
1.2:1
1.2:1
21
29
35
35
10
20
10
Maximum
1.2
1.5
1.7
1.3:1
Units
dB
dB
dB
dB
dB
dB
Ratio
Ratio
Ratio
dBm
dBm
dBm
dBm
nS
nS
mV
________________________________________________________________________________________________________
Web Site:
www.mysoiservices.com
Honeywell
Email:
[e-mail]
Solid State Electronics Center
12001 State Highway 55
2002 1000W
Published June 2002 Page 1
Plymouth, Minnesota 55441-4799
1-800-323-8295