HOA1875 Datasheet, PDF (1/4 Pages) Honeywell Solid State Electronics Center – Transmissive Sensor

HOA1875
Transmissive Sensor
FEATURES
• Choice of phototransistor or photodarlington
output
• Low profile package
• Wide operating temperature range
(- 55¡C to +100¡C)
• 0.200 in.(5.08 mm) slot width
DESCRIPTION
The HOA1875 series consists of an infrared emitting
diode facing an NPN silicon phototransistor
(HOA1875- 001, - 002) or photodarlington
(HOA1875- 003) encased in a black thermoplastic
housing. Detector switching takes place whenever an
opaque object passes through the slot between emitter
and detector. The HOA1875 series has a 0.050 in.(1.27
mm) dia. detector aperture and employs metal can
packaged components. For additional component
information see SE1450, SD1440, and SD1410.
Housing material is opaque polysulfone. Housings are
soluble in chlorinated hydrocarbons and ketones.
Recommended cleaning agents are methanol and
isopropanol.
INFRA-12.TIF
OUTLINE DIMENSIONS in inches (mm)
Tolerance 3 plc decimals ±0.010(0.25)
2 plc decimals ±0.020(0.51)
298
DIM_047.cdr
h
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.