HIH3610 Datasheet, PDF (1/4 Pages) Honeywell Solid State Electronics Center – Molded thermoset plastic housing with cover

Humidity Sensors
Humidity Sensor
HIH-3610 Series
FEATURES
• Molded thermoset plastic
housing with cover
• Linear voltage output vs
%RH
• Laser trimmed
interchangeability
• Low power design
• High accuracy
• Fast response time
• Stable, low drift
performance
• Chemically resistant
TYPICAL APPLICATIONS
• Refrigeration
• Drying
• Metrology
• Battery-powered systems
• OEM assemblies
The HIH-3610 Series humidity sensor is designed specifically for high
volume OEM (Original Equipment Manufacturer) users. Direct input to a
controller or other device is made possible by this sensor’s linear voltage
output. With a typical current draw of only 200 µA, the HIH-3610 Series is
ideally suited for low drain, battery operated systems. Tight sensor
interchangeability reduces or eliminates OEM production calibration costs.
Individual sensor calibration data is available.
The HIH-3610 Series delivers instrumentation-quality RH (Relative
Humidity) sensing performance in a low cost, solderable SIP (Single In-line
Package). Available in two lead spacing configurations, the RH sensor is a
laser trimmed thermoset polymer capacitive sensing element with on-chip
integrated signal conditioning. The sensing element's multilayer
construction provides excellent resistance to application hazards such as
wetting, dust, dirt, oils, and common environmental chemicals.
WARNING
PERSONAL INJURY
• DO NOT USE these products as safety or emergency stop devices, or in
any other application where failure of the product could result in personal
injury.
Failure to comply with these instructions could result in death or
serious injury.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this product sheet is for reference only. Do
not use this document as system installation information
• Complete installation, operation, and maintenance information is
provided in the instructions supplied with each product.
Failure to comply with these instructions could result in death or
serious injury.
Sensing and Control