HFE7000-210 Datasheet, PDF (1/4 Pages) Honeywell Solid State Electronics Center – Super bright LED for optical fiber communication

Fiber Optic Components
50 Mbps 650 nm LED
HFE7000-210
FEATURES
• Super bright LED for optical fiber
communication
• Integrated lens provides
maximum coupling into
plastic fibers
• High power output at 650 nm
• High speed (50 Mbps)
• High reliability
• Designed to meet SERCOS
requirements
WARNING
PERSONAL INJURY
DO NOT USE these products as
safety or emergency stop
devices, or in any other applica-
tion where failure of the product
could result in personal injury.
Failure to comply with these
instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in
this product sheet is for
reference only. Do not use
this document as a product
installation guide.
• Complete installation, opera-
tion, and maintenance infor-
mation is provided with each
product.
Failure to comply with these
instructions could result in
death or serious injury.
HFE7000-210
DESCRIPTION
The HFE7000-210 is a 50 Mbps LED designed to meet the data
transmission requirements needed in factory and office automation.
The 650 nm wavelength provides operation for the low attenuation area
of PMMA (Polymethylmethacrylat) fibers. The plastic SMA housing
delivers a cost-effective module that can be easily mounted on a PCB.
The HFE7000-210 is designed to work with Honeywell’s high-speed
receivers, HFD7000-XXX and HFD7500-XXX.
APPLICATIONS
Designed for data transmission in factory automation and office
settings. The HFE7000-210 delivers high speed and short distance links.
FIGURE 1. PACKAGE INFORMATION
Outline dimensions mm [in] (for reference only)
NOTICE
Stress greater than those listed
under “Absolute Maximum
Ratings” may cause permanent
damage to the device. This is a
stress rating only and functional
operation of the device at these
or any other conditions above
those indicated in the opera-
tional section of this specification
is not implied. Exposure to
absolute maximum rating
conditions for extended periods
of time may affect reliability.
Sensing and Control