510E1A48F204PC Datasheet, PDF (1/1 Pages) Honeywell Solid State Electronics Center – LINEAR AND ROTARY POSITION

Encoders
510 Series, Mechanical
LINEAR AND ROTARY POSITION
600 Series, Optical
The 510 Series controls are manually operated, rotary, mechanical encoders
that provide a two-bit gray code for relative reference applications and a four-
bit gray code for absolute electrical reference applications. The “L” channel
leads the “R” channel by 90° electrically in the CW position. It features
continuous electrical travel and has a rotational life of more than 100,000
shaft revolutions with a positive detent feel.
This series is small-sized, 21,08 mm² by 8,71 mm deep (0.83 in² x 0.343 in)
long and commonly used in limited-space, panel-mounted applications where
the need for costly, front-panel displays can be completely eliminated. Digital
gray-code outputs eliminate the need for
A/D converters.
Bushing:
Shaft:
Body:
Operating temperature:
Rotational cycles:
9,52 mm (0.375 in) Ø x 6,35 mm (0.25 in) L
Flatted, 6,35 mm (0.25 in) Ø x 19,05 mm (0.75 in) L
21,08 mm (0.830 in) square
-40 °C to 105 °C (-40 °F to 221 °F)
100,000
The 600 Series controls are manually operated, rotary, optical encoders that
output two square waves in quadrature at a rate of 128 pulse per channel per
revolution as a standard with other resolutions down to 60 pulses available.
The outputs are TTL compatible. PC terminals or cable leads are available.
Pulses per revolution:
128
Supply voltage:
5.0 V
Body:
34,93 mm (1.375 in) Ø
Shaft:
6.35 mm [0.25 in] dia by 22.23 mm [0.875] long
Bushing:
9,52 mm [0.375 in] dia by 9,52 mm [0.375 in] long
Operating temperature:
-40 °C to 65 °C (-40 °F to 149 °F)
Revolutions:
10 million
1,91 [0.075]
12,2 [0.48]
17,5 [0.69]
12 34
0,64 x 3,05
“A” [0.025 x 0.012]
1,27 typ.
[0.05 Typ.]
OPTIONS
Vertical Mount, PC Terminals/bent back
GREY CODE OPTIONS
2 bit/4 cycles
2 bit/6 cycles
2 bit/9 cycles
4 bit/16 cycles
Horizontal Mount, PC Terminals/straight
GREY CODE OPTIONS
2 bit/4 cycles
2 bit/6 cycles
2 bit/9 cycles
4 bit/16 cycles
REFERENCE
510E1A48F204PC
510E1A48F206PC
510E1A48F209PC
510E1A48F416PC
REFERENCE
510E1A48F204PB
510E1A48F206PB
510E1A48F209PB
510E1A48F416PB
OPTIONS
Series 600
TERMINATION
177,8 mm (7.0 in) long cable
PC terminals exiting side
PC terminals exiting rear
177,8 mm (7.0 in) long cable with connector
REFERENCE
600EN-128-CBL
600EN-128-B66
600EN-128-C24
600EN-128-CN1
Brackets
MOUNTING DIRECTION
Vertical
Horizontal
REFERENCE
510VBKT
510HBKT
www.honeywell.com/sensing
117