MLH025BSD14E Datasheet, PDF (2/4 Pages) Honeywell Accelerometers – Heavy Duty Pressure Sensors/Transducers Line Guide

Heavy Duty Pressure Sensors/Transducers Line
Guide
When reliability is
demanded, Honeywell
delivers.
Heavy Duty Pressure Sensors
and Transducers are found
in applications where they
cannot be easily replaced
— where supreme durability
is a top priority. That’s why
you’ll find Honeywell S&C
heavy duty pressure products
performing expertly in many
potential applications, such
as compressors and hydraulic
controls, and in industries
as diverse as aerospace,
medical, transportation,
agriculture, refrigeration,
and industrial. Our full line of
products deliver enhanced
performance and reliability,
plus: absolute, gage and
sealed-gage measurement; a
wide array of pressure ranges,
port styles, termination types,
and outputs; package types
from miniature surface mount
sensors to high-end stainless
steel isolated (for stringent
process control); pressure
ranges from 3 psi to 8,000 psi;
and corrosion resistance.
Heavy Duty
Pressure Sensors
Pressure connection
Measurement type
Construction
Pressure range
Output
Linearity
Amplified
Compensated temperature
range
Termination
Heavy Duty
Pressure
Transducers
Pressure connection
Measurement type
Construction
Pressure range
Output
Accuracy
Total Error Band
Amplified
Compensated temperature
range
Termination
2
sensing.honeywell.com
13 mm Series
19 mm Series
weld ring with back support,
1/8-27 NPT, 1/4-18 NPT, 7/16 UNF
absolute, sealed gage
wetted parts 316L SS
0 psi to 500 psi through 0 psi to 5000 psi
0 mV to 100 mV (nominal)
±0.25 %BFSL max.
no
weld ring with body O-ring, flush
mount, flush mount with flange, 1/4-18
NPT, 1/8-27 NPT, 7/16 UNF, 1/4 BSPP,
Euro O-ring, 1/4 VCR (female nut)
absolute, gage, vacuum gage
wetted parts 316L SS
0 psi to 3 psi through 0 psi to 500 psi
0 mV to 100 mV (nominal)
±0.25 %BFSL max.
no
0 °C to 82 °C [32 °F to 180 °F]
0 °C to 82 °C [32 °F to 180 °F]
ribbon cable
ribbon cable
PX2 Series
NPT 1/4-18, NPT 1/8-27, 9/16-18 UNF SAE J1926-3, 7/16-20 UNF SAE J1926-3, 1/4
45° Flare Female Schrader, M12 x 1.5 ISO 6149-3, G1/4 ISO 1179-3, G1/8 ISO 1179-3
absolute, sealed gage
port and housing: 304 stainless steel; connector: PBT 30% GF
1 bar to 46 bar | 100 kPa to 4.6 MPa | 15 psi to 667 psi
ratiometric: 5.0 V, 10 %Vs to 90 %Vs; 5.0 V, 5 %Vs to 95 %Vs; 3.3 V, 10 %Vs to 90 %Vs;
3.3 V, 5 %Vs to 95 %Vs
regulated: 1 Vdc to 6 Vdc, 0.25 Vdc to 10.25 Vdc, 0.5 Vdc to 4.5 Vdc, 1 Vdc to 5 Vdc
current: 4 mA to 20 mA
±0.25 %FSS
±2 %FSS at -40 °C to 125 °C [-40 °F to 257 °F]
yes
-40 °C to 125 °C [-40 °F to 257 °F]
Delphi Metri-Pack 150, Micro M12 IEC 61076-2, DIN EN 175301-803C, Deutsch
DTM04-3P, Cable Harness (1, 2, 3, 5 meter)