3AC6 Datasheet, PDF (2/2 Pages) Honeywell Accelerometers – Interactive Catalog Replaces Catalog Pages

Basic Switches
Door
Style 1
Style 2
Style 3
Style 4
Style 5
Style 6
Style 7
Style 8
AC Series
FEATURES
ELECTRICAL RATINGS
ɀ Automatically cut power when service
A
door or drawer is opened, helping pro-
tect personnel and equipment.
B
ɀ Enables circuit testing with power On
by manually pulling rod actuator to
maintained-On position. (Closing door
or drawer resets switch.)
C
ɀ Basic switches are component recog-
nized by UL to UL1054 special use
switches.
ɀ UL recognized AC are available
ORDER GUIDES WITH STEEL ROD ACTUATORS
15 amps, 125, 250 or 480 VAC; 1/2
amp, 125 VDC; 1/4 amp, 250 VDC.
5 amps, 125 or 250 VAC; 30 VDC
ind., 3 amps (sea level) and 2.5 amps
(50,000 ft.); res., 5 amps (sea level
and 50,000 ft.); max. inrush 25 amps.
15 amps, 125 or 250 VAC; 1/2 amp,
125 VDC; 1/4 amp, 250 VDC; 1/3 hp,
125 or 250 VAC.
Characteristics:
F.P. — Free Position;
O.P. — Operating Position;
D.P. — Depressed Position.
Style
No.
Description
Basic Elec. Catalog
Switch Rating Listing
F.P.
max.
mm
In.
O.P.
min.
mm
In.
D.P.
max.
mm
In.
Temp.
Ratings
1 15 amps, SPDT.
BZ
A 1AC2
11,1 6.35 3.18 –65°F to +180°F
.438 .250 .125
2 5 amps,
Four SPDT ckts.
SM(4) B 8AC1
9,53 5,16 3,18 –65°F to +250°F
.375 .203 .125
3 Three 6-foot leads. SE
Sealed basic
switches
5 amps, SPDT
B 9AC4
9,53 5,16 3,18 –65°F to +221°F
.375 .203 .125
3 Two 3-foot leads.
SE
Sealed basic
switches.
5 amps, SPST-N.O.
B 9AC12-3
9,53 5,16 3,18 −65°F to +221°F
.375 .203 .125
4 Can be reset without V3
momentary ckt.
break.
15 amps, SPDT.
C 13AC1
15,9 12,3 6,68 −67°F to +300°F
.625 .485 .263
5 Miniature size.
5 amps, SPDT
SM
B 17AC1-T
9,53 5,59 4,45 −65°F to +250°F
17AC18-T† .375 .220 .175 −67°F to +185°F
(MS16106-4)
6 Tapped hole in end V3
of actuator rod.
15 amps, SPDT.
C 2AC59†
9,53 5,16 3,18 −67°F to +185°F
(MS16106-1) .375 .203 .125
†–These are military approved listings and the temperature range shown is for the finished product. All other
listings are not military approved and the temperature range shown is the range for the basic switch only.
WITH HIGH STRENGTH THERMOPLASTIC ROD ACTUATORS*
2 5 amps.
Four SPDT ckts.
SM(4) B
8AC9
9,53 5,16 3,18
(MS16106-3) .375 .203 .125
6 15 amps. SPDT.
V3 C
22AC1
9,53 5,16 3,18
.375 .203 .125
6 Tapped hole in end V3 C
of actuator rod.
15 amps. SPDT.
22AC2
9,53 5,16 3,18
.375 .203 .125
7 15 amps. SPDT.
V3 C
23AC1
9,53 5,16 3,18
.375 .203 .125
7 Tapped hole in end V3 C
of actuator rod.
15 amps. SPDT.
23AC2
9,53 5,16 3,18
.375 .203 .125
8 15 amps.
Two SPDT ckts.
V3(2) C
24AC1
9,53 4,75 3,18
.375 .187 .125
8 Tapped hole in end V3(2) C
24AC2
9,53 4,75 3,18
of actuator rod.
4AC54** .375 .187 .125
15 amps.
(MS16106-2)
Two SPDT ckts.
4AC55
(MS16106-5)
*Not for use above 85°C (+185°F). Use steel
actuators at higher temperatures. For additional
catalog listings, contact the 800 number.
**Both switches operate on pull stroke, only one
switch operates on push (reset) stroke.
For application help: call 1-800-537-6945.
Honeywell Sensing and Control 89