SS526GT Datasheet, PDF(1/2 Page) Honeywell Accelerometers

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

SS526GT Datasheet, PDF (1/2 Pages) Honeywell Accelerometers – SOLID STATE SENSOR

FO-55112-C

HONEYWELL

PART NUMBER

SS526GT

.006 .002

[.16 .05 ]

.099 .004

[2.50 .10 ]

.002 .002

[.05 .05 ]

.016 .003

[.41 .07 ]

TO HALL

SENSING SURFACE

R.010 MAX TYP

[,25]

HALL 2

.094

[2.39 ]

.164 .008

[4.16 .20 ]

.052 .004

[1.32 .10 ]

Vcc (+)

2X .059 .002

[1.50 .05 ]

DIRECTION

.067 .004

[1.70 .10 ]

.055

[1.40 ]

GND (-)

HALL 1

.011

[.28 ]

HALL OFFSET FROM

PACKAGE CENTER

3X .016 .004

[.41 .10 ]

SPEED

.173

[4.39 ]

CATALOG LISTING AND

DATE CODE MARKED ON

THIS SIDE

.005[,13] MAX FLASH

ALL SIDES 2

REV DOCUMENT

CHANGED BY

CHECK

D 0089528 PMH 17MAY12 RS

NOTES

1 THE MAGNETIC FLUX APPLIED TO OPERATE THE SENSOR MUST BE IN THE DIRECTION

SHOWN

(THIS ASSUMES THE CONVENTION THAT THE DIRECTION OF THE EXTERNAL FLUX OF A

MAGNET

IS FROM THE NORTH TO THE SOUTH POLE OF THE MAGNET)

2 GATE VESTIGE OF .008[,20] MAXIMUM IS PERMITTED AT PACKAGE ENDS. UNDERFLUSH

BREAKOUT IS LIMITED TO .007[,18] MAXIMUM

3 THIS PRODUCT IS SUPPLIED ONLY IN TAPE AND REEL FORM PER EIA STD 481

4 - SOLDERING TEMPERATURE EXPOSURE MUST BE LIMITED TO 245

C FOR NOT MORE

THAN 10 SECONDS. INFRARED REFLOW IS RECOMMENDED. EXPOSURE TO WAVE

SOLDERING

TECHNIQUES OR SOLDERING TEMPERATURES OUTSIDE THE RECOMMENDATION CONDITIONS

ARE LIKELY TO DEGRADE SENSOR PERFORMANCE AND RELIABILITY, AND WILL VOID ANY

WARRANTY

5 ABSOLUTE MAXIMUM RATINGS ARE THE EXTREME LIMITS THE SENSOR WILL MOMENTARILY

WITHSTAND WITHOUT DAMAGE. ELECTRICAL AND MAGNETIC PERFORMANCE LIMITS ARE

NOT

GUARANTEED IF THE ABSOLUTE MAXIMUM LIMITS ARE EXCEEDED, NOR WILL THE SENSOR

NECESSARILY OPERATE AT THE ABSOLUTE MAXIMUM LIMITS

6 THE LISTED RATING IS FOR TESTING AT 25

C PER IEC 801-2, LEVEL 1, WHEN TESTED PER

MIL-STD-883, METHOD 3015.7 THE SENSOR WILL MEET CLASS 3 (4KV MIN)

7 LIMIT APPLIES TO EACH OUTPUT

8 - ALL DIMENSIONS : MM

INCH

DESIGN UNITS : INCH (METRIC DIMENSIONS ARE FOR REFERENCE ONLY)

9 WHEN THE CHANGE IN MAGNETIC FLUX AT H1 LEADS THE CHANGE AT H2, THE

DIRECTION

OUTPUT IS HIGH; WHEN H1 FOLLOWS H2, THE DIRECTION OUTPUT IS LOW

10 - OPEN COLLECTOR OUTPUTS CAPABLE OF SWITCHING 50 mA WITHOUT DAMAGE. DEVICE

WILL

NOT PERFORM WITHIN SPECIFICATION WHILE SWITCHING 50 mA

.177 .004

[4.50 .10 ]

DESCRIPTION :

A HALL EFFECT BASED SPEED AND DIRECTION SENSOR WITH TWO SEPARATE OUTPUTS. TWO

ACTIVE HALL LATCHES PROVIDE INDICATION OF THE SPEED AND DIRECTION OF MAGNETIC

GRADIENT ACROSSS THE PACKAGE FACE, SUCH AS THE GRADIENT FROM A ROTATING RING

MAGNET

HALL 1

TRIGGER

AMPLIFIER

HALL 2

TRIGGER

AMPLIFIER

SPEED OUTPUT

DIRECTION OUTPUT

LOGIC

SENSOR FUNCTION DIAGRAM WITH CUSTOMER SUPPLIED RING MAGNET

DESIGN UNITS: INCH

TOLERANCES UNLESS NOTED:

DRAWN

JLH

05MAY08

CHECK

JLH

05MAY08

THIS DRAWING COVERS A PROPRIETARY ITEM

AND IS THE PROPERTY OF HONEYWELL.

THIS DRAWING IS NOT TO BE COPIED OR USED

WITHOUT THE PERMISSION OF HONEYWELL.

TITLE

SOLID STATE SENSOR

INTERPRET PER ASME Y14.5M-1994

OTHER HONEYWELL ENGINEERING

STANDARDS MAY APPLY

SIZE TYPE CAGE_CODE DRAWING NAME

CI -

SS526GT

Pro/ENGINEER

3D SCALE 10:1

SHEET

REV

1 OF 2

▷