HOA2001-001 Datasheet, PDF (1/4 Pages) Honeywell Accelerometers – Transmissive Optoschmitt Sensor

HOA2001
Transmissive Optoschmitt Sensor
FEATURES
• Direct TTL interface
• Buffer logic
• 0.060 in.(1.52 mm) dia. detector aperture
• 0.120 in.(3.05 mm) slot width
• 0.050 in.(1.27) offset pin circle detector eads
DESCRIPTION
The HOA2001 consists of an infrared emitting diode
facing an Optoschmitt detector encased in a black
thermoplastic housing. The photodetector consists of a
photodiode, amplifier, voltage regulator, Schmitt trigger
and an NPN output transistor with 10 kì (nominal) pull-
up resistor. The buffer logic provides a high output
when the optical path is clear, and a low output when
the path is interrupted. The HOA2001 employs plastic
molded components. For additional component
information see SEP8506 and SDP8600.
Housing material is polyester. Housings are soluble in
chlorinated hydrocarbons and ketones. Recommended
cleaning agents are methanol and isopropanol.
INFRA-45.TIF
OUTLINE DIMENSIONS in inches (mm)
Tolerance 3 plc decimals ±0.010(0.25)
2 plc decimals ±0.020(0.51)
360
DIM_062.ds4
h
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.