986-0030 Datasheet, PDF (1/1 Pages) Honeywell Accelerometers – High-flexibility triax mount

Q-Flex^® Multi-Axis
Accelerometer
High-flexibility triax mount
The Q-Flex Multi-Axis Accelerometer provides an orthogonal
reference with a common center of percussion for up to three
accelerometers. The triaxial accelerometer mount is
designed to be simple and accept nearly all of the Q-Flex
accelerometers.
The design objective is to provide a three-axis integration
level that is cost-effective for a variety of applications. The
unit is ready to use with three axes of precision scaled analog
outputs.
A common board assembly provides voltage output scaling
dynamic filtering, and bias trim for the customer’s unique
requirements.
Features
Options
• High flexibility triax mount
Triax Voltage Output
Temperature Modeling for
• QA-650 to QA-3100 performance _{• Bias}
•
Current output or 5 standard scale
factors from 0.25 V/g to 5.0 V/g Bias
•
Scale Factor
trimmed to <1% bias trimmed to
<1mg.
• Dynamic filtering and over-ranging
• Temperature sensor output
• Axis Misalignment
• Biax Configuration
Improved performance,
different scaling and
• Dual built-in-test
interface configurations are
available.
• 25 pin D-Submarine Interface
-003X
-0030
-0031
-0032
-0033
-0034
-0035
-0036
986-003X-0YY Part Numbering
Voltage Scale Factor
Current Output
fc Dynamic Filter -3dB
—
0.25 V/g
500 Hz
0.5 V/g
250 Hz
1.0 V/g
125 Hz
2.5 V/g
50Hz
5.0 V/g
25Hz
Special
—
Find out more:
www.inertialsensor.com
Defense & Space Redmond
Honeywell International, Inc.
MAIL ADDRESS: P.O. Box 97001
15001 N.E. 36^th Street
Redmond, Washington 98073-9701
PHONE: [phone]
FAX: [phone]
www.honeywell.com
EXP035, August 2005
Copyright © 2004, Honeywell
International Inc. All Rights
Reserved. Printed in USA
ISO-9001 Certification Since 1995
DISCLAIMER: Specifications are subject to change without notice. Honeywell reserves the
right to make changes to any product or technology herein to improve reliability, function, or
design. Honeywell does not assume any liability arising out of the application or use of the
product.
Accelerometers exported from the United States must be done in accordance with the Export
Administration Regulations (EAR) and/or the International Traffic in Arms Regulations (ITAR)
as applicable.