2A70 Datasheet, PDF (1/11 Pages) Honeywell Accelerometers – Pushbutton Switches and Indicators

Manual Switches
Pushbutton Switches and Indicators
BARRIER MOUNT
Display screen
(page 115)
Mounting barrier
(next page)
Housing
(next page)
Switch unit
(page 114)
Series 2
FEATURES
ɀ Easy-to-assemble modules provide
thousands of display/control
combinations
ɀ Up to 4 incandescent lamps
ɀ 1, 2, 3, or 4-section display
ɀ Transmitted or projected color
ɀ Integral hold-in coil option provides
remote released contacts. Pull-in coils
(flange mount only) enable remote
actuation
ɀ Switch guard accessory.
CHANGE LAMPS OR FILTERS
FROM PANEL FRONT
Mounting barriers attach to either the long
or short sides of the housing. They have
spring clips which grip the panel. Mount-
ing barriers also separate display screens
to protect against inadvertent operation.
Multiple units can be attached together in
a strip and snapped into a panel slot; or
they can be mounted individually.
FLANGE MOUNT
Display screen
(page 115)
Housing
(page 113)
Switch
unit
(page 114)
Without tool. Remove display screen/
lampholder assembly from 2C200 oper-
ator-indicator (or 2F200 indicator). Unit is
keyed to maintain proper orientation
when replacing. Use only flange base
T-1³â„4 lamps with 2C200 and 2F200 de-
vices.
LAMPS AND FILTERS
Order lamps and filters for projected color
from page 111.
Flange mount units have mounting clips enable use of an overlay panel, if desired.
ready-attached to the housing. They can Groupings can be separated by optional
be individually installed or replaced; and spacing barriers.
MODULES ASSEMBLE EASILY
All modules are ordered as separate
items which snap together for easy as-
sembly.
Honeywell ɀ Sensing and Control ɀ 1-800-537-6945 USA ɀ ⍣1-815-235-6847 International ɀ 1-800-737-3360 Canada
105