DSC Datasheet, PDF (1/7 Pages) Welwyn Components Limited – Double-Sided Chip Resistors

DSC Series-Stacked Capacitors
Large Size Stacked Capacitors-87106 Style
DSC Series
Holy Stone
‹ Features
‰ Inherently low ESR, Can effectively replace
Tantalum & Aluminum Electrolytic caps of much
higher values.
‰ Very high CV, MLCC design.
‰ Available as through-hole (N-lead) or surface
mount (J or L lead configurations)
‰ High reliability testing available including space
level screening.
‰ Custom sizes and CV values available—Contact
the factory to define your custom needs.
‹ Applications
‰ Ideal for C.O.T.S. applications
‰ 87106—All dash numbers available.
‰ Switch-mode power supply filtering.
‰ Other HIREL or high end industrial uses.
‹ Summary of Specifications
Operating Temperature
Rated Voltage
Temperature Coefficient of
Capacitance
Voltage Coefficient
Capacitance Range
Dissipation Factor :
Insulation Resistance
Aging
Dielectric Withstanding Voltage
-55 to +125 Ԩ (Optional to 200˚C)
50Vdc to 500Vdc
NPO : ≤ ± 30ppm/ Ԩ , -55 to +125 Ԩ (EIA Class Ι )
X7R : ≤ ± 15%
, -55 to +125 Ԩ (EIA Class Ⅱ )
BX/BR/BQ : ≤ ± 15% , -55 to +125 Ԩ (EIA Class Ⅱ )
NPO: 20nF to 20uF
X7R : 500nF to 800uF
BX/BR/BQ : 170nF to 330uF
NPO : Q ؤ1000 at 1KHz
X7R : 2.5%max. at 1KHz
BX/BR/BQ : 2.5%max. at 1KHz
100GΩ or 1000/C Ω whichever is smaller
NPO : 0% , X7R, BX/BR/BQ : 2.5% per decade of time
V ≤50V
; 250% Rated Voltage
100V ≤ V <500V ; 250% Rated Voltage
500V ≤ V <1KV ; 150% Rated Voltage
‹ How To Order
DSC
3
6
N
M
224
K
501
8
H
01
Product Stack
Case Size Lead
Material Capacitance Tolerance Rated
Marking
Special Test Special
Code
(per 87106) Configura
(pF)
Voltage
Requirement Requirement
tion
DSC:
EX :
Ex.:
Ex.:
Ex.:
Ex.:
Ex.:
Ex.:
Ex.:
Blank:
Blank:
Manufactured _{1: one stack}
to DSCC
2: two stack
Drawings
87106 &
88011
3: three stack
4: four stack
5: five stack
1 : Case size 1
2 : Case size 2
3 : Case size 3
4 : Case size 4
5 : Case size 5
6 : Case size 6
J :J Lead N: NPO
L :L Lead X: X7R
N:Straight M:
Lead BX/BR/BQ
103:10x10³
224:22x10⁴
475:47x10⁵
J: +/-5.0% 050:50Vdc N: No Marking Standard
No special
K: +/- 10% 101:100Vdc S: Special electrical test requirement
M: +/- 20% 201:200Vdc Marking H:
01~99
501:500Vdc 8: 87106
87106
Customer
M: Marked Testing
special
6: six stack
(cap &
`
requirement
Tolerance)
-1-
Revision date : 2010.06.30