HI-3110_16 Datasheet, PDF (45/54 Pages) Holt Integrated Circuits – Avionics CAN Controller with Integrated Transceiver

HI-3110, HI-3111, HI-3112, HI-3113
DC ELECTRICAL CHARACTERISTICS
VLOGIC = 3.3V or 5V, VDD = 5V. Operating temperature range (unless otherwise noted).
PARAMETER
SYMBOL
CONDITIONS
LIMITS
UNIT
MIN TYP MAX
Supply
Supply Voltage
Supply Current
Logic Inputs
High-Level Input Voltage
Low-Level Input Voltage
Input source current
Input sink current
Pull-up current (CS)
Pull-down current (SI, SCK, MR pins)
(TXEN)
Logic Outputs
High-Level Output Voltage
Low-Level Output Voltage
Output sink current
Output source current
SO Output Leakage
VLOGIC
VDD
ILOGIC
IDD
3.15
5.25 V
4.75
5.25 V
All inputs/outputs open except the
oscillator configured for 24MHz and
with 60 Ohm resistors at CANH and
CANL to SPLIT
VLOGIC current: Operating
Sleep
VDD current: Operating
Sleep
0.6
5 mA
5.0
25 μA
6.3
15 mA
15
30 μA
VIH
0.7VLOGIC
V
VIL
0.3VLOGIC V
IIH
VIL = 0V, VLOGIC = 5.0V
CS (pull down)
All other inputs
100
200 μA
1.5 μA
IIL
VIH = 5.0V, VLOGIC = 5.0V
CS
-1.5
μA
SCK, SI, MR (pull up)
-200 -100
μA
TXEN (pull up)
-100
-50
μA
IPU
VPU = VLOGIC
-200
-30 μA
IPD
VPD = GND
30
200 μA
IPD
VPD = GND
15
100 μA
VOH
VOL
IOL
IOH
ISOL
IOH = -1mA
IOL = 1mA
VOUT = 0.4V
VOUT = VDD - 0.4V
VOUT = VLOGIC Tri-state condition
0.9VLOGIC
1.6
V
0.1VLOGIC V
mA
-1 mA
10 μA
Oscillator Pins
OSCIN Feedback Resistor
OSCOUT Drive Current
ROSC
IOSC
Control Register 1, bit 3 = 0
Input at VLOGIC or 0V
Control Register 1, bit 3 = 1
Input to VLOGIC only (pull down)
VLOGIC = 3.3V, VIN = 3.3V, VOUT = 0.5V
VLOGIC = 3.3V, VIN = 0V, VOUT = 2.8V
4
4
0.85
5
6 MΩ
5
6 MΩ
1.1
mA
-0.7
-0.45 mA
HOLT INTEGRATED CIRCUITS
45