HI-8570_14 Datasheet, PDF (1/9 Pages) Holt Integrated Circuits – ARINC 429 Supply Line Driver

May 2014
DESCRIPTION
The HI-8570 and HI-8571 are CMOS integrated circuits
designed to directly drive the ARINC 429 bus in an 8-pin
package. Two logic inputs control a differential voltage
between the output pins producing a +10 volt One, a
-10 volt Zero, and a 0 volt Null.
A logic input is provided to control the slope of the
differential output signal. Timing is set by an on-chip
resistor and capacitor and tested to be within ARINC
requirements.
The HI-8570 has 37.5 ohms in series with each line driver
output. The HI-8571 provides the option to bypass part of
the output resistance so external resistance may be
added for lightning protection circuits.
The HI-8570 or the HI-8571 along with the HI-8588 line
receiver offer the smallest options available to get on and
off theARINC 429 bus.
FEATURES
• Direct ARINC 429 line driver interface
in a small package
• On-chip line driver slope control and
selection by logic input
• Low current 5 volt supplies
• CMOS / TTL logic pins
• Plastic and ceramic package options -
surface mount and DIP
• Thermally enhanced SOIC packages
• Extended Temperature and Burn-in
available
HI-8570, HI-8571
ARINC 429
+/- 5V Supply Line Driver
PIN CONFIGURATION
SLP1.5 1
TX0IN 2
TX1IN 3
GND 4
8 V+
7 TXBOUT
6 TXAOUT
5 V-
SUPPLY VOLTAGES
V+ = +5V
V- = -5V
FUNCTION TABLE
TX1IN TX0IN SLP1.5
0
0
X
0
1
0
0
1
1
1
0
0
1
0
1
1
1
X
TXAOUT
0V
-5V
-5V
5V
5V
0V
TXBOUT
0V
5V
5V
-5V
-5V
0V
SLOPE
N/A
10ms
1.5ms
10ms
1.5ms
N/A
PIN DESCRIPTION TABLE
PIN SYMBOL
1 SLP 1.5
2 TX0IN
3 TX1IN
4 GND
5 V-
6 TXAOUT
7 TXBOUT
8 V+
FUNCTION
LOGIC INPUT
LOGIC INPUT
LOGIC INPUT
POWER
POWER
OUTPUT
OUTPUT
POWER
DESCRIPTION
CMOS OR TTL, V+ IS OK
CMOS OR TTL
CMOS OR TTL
GROUND
-5 VOLTS
LINE DRIVER TERMINAL A
LINE DRIVER TERMINAL B
+5 VOLTS
(DS8570 Rev. F)
HOLT INTEGRATED CIRCUITS
www.holtic.com
05/14